Barton Traveller Kit Complete Kit

Barton Re-circulating Ball Bearing Traveller Systems - Complete Kit

Contains sliding bolt track, end fittings and traveller car
Size 1 for yachts up to 8.5m, Size 2 for yachts up to 11m
Spectro grey anodised finish
3 different set-ups available
Check the table below

£ 275.70 VAT incl.

£ 313.30

-12%

Calculate Delivery Cost

Sliding bolt track features a smooth, clean profile and also makes retro-fitting easier as bolts can be slid along the extrusion to match existing fastening holes.

SpecificationsSize 1Size 2
Max Boat SizeMax Boat Size8.5m
28.5ft
11.0m
36ft
Track WidthTrack Width20mm26mm
Track LengthTrack Length1.4m1.6m
Max control line ØMax control line Ø6mm8mm
SWLSWL500Kg700Kg
FasteningsFastenings5mm6mm

Traveller System Guide
N.B. Series 1 and 2 relates to Size 1 and 2

2:1 Purchase Kit - Part numbers: Size 1 20900, Size 2 24900

with cleats at 70° on end fittings

  • 1.4m (size 1) / 1.6m (size 2) sliding bolt track
  • Traveller car with single shackle take off
  • End fittings (pair)
  • Plastic end caps (pair)
  • Pilot track & fitting instructions.

 

 Barton 24900 

4:1 Purchase Kit - Part numbers: Size 1 20901, Size 2 24901 

with cleats at 70° on end fittings

  •   1.4m (size 1) / 1.6m (size 2) sliding bolt track
  •   Traveller car with single shackle take off
  •   End fittings (pair)
  •   Plastic end caps (pair)
  •   Pilot track & fitting instructions

Barton 24901

4:1 Purchase Kit - Part numbers: Size 1 20902, Size 2 24902

with cleats on traveller

  •   1.4m (size 1) / 1.6m (size 2) sliding bolt track
  •   Traveller car with single shackle take off
  •   End fittings (pair)
  •   Plastic end caps (pair)
  •   Pilot track & fitting instructions

Barton 24902


Barton recommended sizes regarding suitability for a given yacht length are only a guide and assume a monohull with boom end sheeting, loaded vertically to the traveller.
Mid-boom sheeting and severely angled take offs can impose greater loads and suitable allowances should be made for this.
If you are close to the suggested maximum yacht length, Barton advise upgrading to the next size up.

N.B. Complete pack kits are not suitable for open span applications as they require beam section track