Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
  • -£115.00
  • Out-of-Stock

Spade Anchor Dimensions imperial and metric
Spade Anchor, shank dimensions, imperial and metric

One off returned S120 at a cheaper price

The galvanising looks like it has been dipped in salt water

See photo of the actual anchor

Designed by Alain Poiraud

High Holding Power Concave Flukes

Dismantles for stowage

Spade claim that they manufacture the world's most reliable anchor

£915.00 £115.00


More Information

Jimmy Green Marine stock Spade S Series - S40, S60, S80, S100, S120, S140, S160 on our premises in Beer.

Spade Anchor features:

Spade stowage - the Spade is designed to be dismantled with ease for convenient storage until required for deployment

Spade - unique triangular ballast chamber filled with lead - designed to land the anchor at the optimum angle for penetration every time (a similar angle to a chisel being used in wood) and, just as importantly, locates 50% of the total weight directly over the penetrating tip, maximising the Spade's ability to dig in to the most impenetrable sea beds e.g. Mediterranean sea grass, thick weed and kelp

Spade digs in - beginning the second it lands on the seabed, assisted by the Spade's optimum angle and weight distribution.

Spade holds - by presenting it's full surface area towards the direction of load - the larger the surface area, the greater the holding power. Any load sufficient enough to move the anchor will cause it to bury further, Whereas a convex* blade can pull out with a sudden wind or tide shift, the SPADE's concave blade will remain buried. A concave blade acts a bit like a parachute under the seabed and continues to remain buried and offer maximum resistance  even when the load is so great that it begins to move. The SPADE will not pull out during wind or tide shifts, instead it chisels its way around to the new direction.

Spade keeps on holding - built to withstand enormous loads as they keep holding long after other anchors have dragged. On S80 and above, the shanks are fabricated to form a triangular box section to maximise strength without compromising weight distribution.

Spade anchors are built for optimum performance rather than down to a price and come with a six month manufacturer full satisfaction warranty.

Spade Video

The Spade video illustrates that:
Spade digs in immediately
Spade will turn during wind and tide shifts without pulling free
Spade will always land at the optimum angle for penetration but should it somehow land upside down it will flip over instantly
Spade unique design means that it will penetrate even when clogged with mud or sand
Spade can be dismantled for convenient stowage - the two pieces are held together by one NON load bearing bolt.

Spade 7 point safety criteria:

  1. The anchor must dig in fast.
  2. The anchor must bury deep.
  3. The anchor must give the maximum holding power without dragging.
  4. The anchor must offer a constant resistance to movement – even if it eventually moves under extreme load.
  5. The anchor must hold despite wind or current shifts.
  6. The anchor rode must not be able to snag the anchor.
  7. The anchor must be strong enough to withstand very high loads.

Spade Technical Information on how the Safety Criteria are achieved

Spade anchors deliver on all 7 safety criteria and in addition Spade Anchors offer these extra benefits:

  • Spade does not require the use of a special mooring line, or anchoring technique.
  • Spade can be used with a low rode length to depth ratio
  • Spades are painted bright yellow so you can visually check how well they are dug in
  • Spades are self-launching and self-retrieving.
  • Spades fitt snugly on most bow rollers, presenting a rounded forward surface
  • Spades can be easily dismantled into shank and body, for storage or transport

Spade size relates to Surface Area e.g. S40 = 400 square centimetres.

Spade Dimensions

Galvanised S Series Sizing and Dimensions Chart
Size / Weight A/B/C/D/E/F/G (mm) Monohull Length Monohull Displacement Multihull Length Multihull Displacement
S40 = 6kg 578 / 228 / 242 / 264 / 435 / 270 / 6 <6.5m <1T N/A N/A
S60 = 10kg 687 / 287 / 295 / 315 / 518 / 335 / 6 <7.5m <2T <6.5m <1T
S80 = 15kg 785 / 324 / 325 / 345 / 589 / 346 / 8 <10.5m <6.5T <7.5m <2T
S100 = 20kg 892 / 365 / 380 / 392 / 670 / 393 / 8 <16m <12T <10.5m <4.5T
S120 = 25kg 953 / 393 / 411 / 418 / 715 / 420 / 8 <18m <16T <16m <12T
S140 = 30kg 1053 / 415 / 445 / 462 / 464 / 12 <20m <20T <18m <16T
S160 = 37kg 1080 / 450 / 470 / 510 / 810 / 460 / 12 <22m <23T <20m <20T
S180 = 44kg 1130 / 470 / 490 / 540 / 880 / 495 / 12 <25m <27T <22m <23T
S200 = 55kg 1200 / 505 / 545 / 532 / 910 / 530 / 12 <27m <30T <25m <27T

  • Purchase Type - Clearance
  • Finish - Galvanised
  • Anchor Weight kg - 30.0kg
  • Anchor Weight kg - 44.0kg
  • Anchor Weight kg - 55.0kg
  • Anchor Weight kg - 6.0kg
  • Anchor Weight kg - 10.0kg
  • Anchor Weight kg - 15.0kg
  • Anchor Weight kg - 20.0kg
  • Anchor Weight kg - 25.0kg