Galvanised Shackles - Certified Green Pin
Green Pin Shackles feature a hot dip galvanised body and a zinc plated pin. The pin is zinc plated to make it easier to paint with the Van Beest trademark Green colour.
Green pin certified shackles are much stronger than standard galvanised shackles due to a narrower jaw width and thicker pin diameter.
Manufactured in the Netherlands by Van Beest to EN13889 with a 6:1 safety factor.
Every shackle is covered by the Green Pin certificate of conformity.
|Item||Working Load Limit||Safety Factor||Estimated Break Load||Chain Size|
|5mm Bow and D||0.33 ton||x 6||2 ton||6mm|
|7mm Bow and D||0.5 ton||x 6||3 ton||7mm|
|9mm Bow and D||0.75 ton||x 6||4.5 ton||8mm|
|10mm Bow and D||1 ton||x 6||6 ton||10mm|
|11mm Bow and D||1.5 ton||x 6||9 ton||10/12mm|
|13mm Bow and D||2 ton||x 6||12 ton||13/14mm|
|16mm Bow and D||3.25 ton||x 6||19.5 ton||Ground|
|19mm Bow and D||4.75 ton||x 6||28.5 ton||Ground|
|22mm Bow and D||6.5 ton||x 6||39 ton||Ground|
|25mm Bow and D||8.5 ton||x 6||51 ton||Ground|
Material: bow and pin high tensile steel, Grade 6, quenched and tempered
Safety Factor: Manufacturer Break Load = 6 x Working Load Limit
Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A
Shackle body finish : hot dipped galvanised
Shackle pin finish : Green Powder Coated
Temperature Range : -20°C up to +200°C
Standard Issue Certificates: a Van Beest works certificate is supplied to Jimmy Green Marine as standard and is available to our customers on request.
Additional Certificates, available by special request: Jimmy Green Marine can request a certificate of basic raw material, a manufacturer test certificate, or a EC declaration of conformity if required.
Unlike standard galvanised shackles, use the same size as the chain (because the pin is one size larger).