Harken ESP Furling - Unit 1

Suitable for boats 26' - 35' (7.9-10.6m) in length

Pin size 11.1 or 12.7mm

For use with 6, 7 or 8mm Forestay

Choice of 3 drum heights

£ 1,541.00 inc VAT

Calculate Delivery Cost

The ESP furling system Unit 1 is the perfect companion aboard yachts between 26 and 35 feet in length.

The system has been designed to be DIY friendly without compromising the professional elegance of a Harken product.

Harken ESP1 Features:

The unit can accommodate a maximum headstay length of 17m when purchased with 2 additional 2m foils and connectors.

The standard kit comes with enough foils to make a total 13m length.

The kit will fit a maximum headstay diameter of 8mm or -10 rod.

The legs underneath the drum can be supplied ready to take either 11mm or 13mm pins.

Easy installation is achieved by slipping the foils on over the standard marine eye.
There is no need to cut the wire during installation. The adjustable bottom foil fine-tunes the system length.


The Spool is made from Hard Lube-anodised aluminum.
The cover, flange, and guard are moulded from glass reinforced polymers for high strength.

Foils are clear-anodised for durability.

The stainless steel sail feeder is strong and durable.

Long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility.

Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose the long leg kit when using a turnbuckle with swage.

The medium leg kit allows for a slightly lower drum in conjunction with a bottle screw. However, there is a maximum bottle screw length that will fit. Please call for details.

Choose the short leg kit when the furler attaches directly to a marine eye at the bottom of the stay. Short legs allow the sail to be closer to the deck.

Harken ESP Furl Install Guide

- ESP JIB REEFING & FURLING Installation Manual – Intended for specialized personnel or expert users

Download (2.81M)