Marlow 10mm D2 Competition - Sheets, Halyards, Control Lines


Marlow D2 Competition -  - still available from Jimmy Green, discontinued by Marlow and replaced by D2 Club

Better all round performance than the Marlow replacement D2 Club

Less dyneema content but less expensive than D2 Racing


£ 0.00 VAT incl.

Total Weight: kg

Total Length: m

Marlow D2 Competition - now discontinued by Marlow and replaced by D2 Club
Cover: 16plait 100% Polyester
Core: 12 strand braided Dyneema® SK78 with additional inner traction jacket

Performance Cruising, low stretch halyard for competitive cruising and occasional racing

D2 Competition performance and pricing falls between:
100% premium polyester for Cruising
Polyester jacket/full Dyneema core for Racing

Diameter 8mm 10mm 12mm
Weight p100m 4.83kg 7.63kg 9.71kg
MBL 1520kg 2680kg 4930kg

MBL = Marlow minimum break load

N.B. The inner cover plait is not load bearing and a certain amount is removed as part of the core dependent splice resulting in a reduced diameter over a short length. Although it looks thin, the strength of the splice and the rope is not compromised

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end


After saving your customised product, remember to add it to your basket.



* required fields