Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
10mm Titan Grade 40 Calibrated Anchor Chain
10mm Titan Grade 40 Calibrated Anchor Chain
10mm Titan Grade 40 Calibrated Anchor Chain
10mm Titan Grade 40 Calibrated Anchor Chain

Manufactured by Canada Metal (Pacific)

Proof-tested and hall-marked Grade 43

ISO4565 or DIN766 Calibration available

Galvanising to a minimum 100 microns

Select a continuous length up to 400 metres

Test Certificate available

£14.00

Price per metre

More Information
Features
Accessories
Downloads

Downloads include Titan Sample Test Certificates and Grade 43 Specification for DIN766 and ISO

10mm Titan Grade 43 Calibrated Anchor Chain is manufactured, hot dip galvanised, proof-tested and engineered by CMP to specifications exceeding DIN766

Titan Chain Titan Marine Products are a brand of Canada Metal (Pacific) the manufacturers of the world renowned Rocna anchor.

Titan G43 Chain specification and the resulting higher than comparable Grade 40 break loads are testimony to the quality of the steel and the manufacturing process.

All Titan Marine Chains are manufactured and proof tested in a ISO-9001 environment to ensure their lasting quality and strength for yacht anchoring and mooring.

All Titan Grade 40 Chain is clearly embossed at regular intervals with G43, CMP and DIN766 or ISO as appropriate. This is a clear testament to their confidence in the chain and galvanising quality

All Titan Grade 43 Chain is hot dip galvanised to a minimum 100 Microns

10mm Titan Grade 43 Calibrated Anchor Chain is available in two different calibrations - ISO4565 (10 X 30) AND DIN766 (10 X 28)

It is very important to check the size and calibration of your gypsy/chain before you order

If you are unsure we can help you to decide - we will take all reasonable steps to ensure you get the correct chain

The simplest way to check that you are buying the correct calibration is to take a measurement from your existing chain, providing of course that it fits correctly.

We measure 10 links because, in practice, it is difficult to measure one link accurately enough.
The links should be laid out flat and pulled tight.
Measure from the outside edge to outside edge.
Compare your measurement with our stock:
Jimmy Green Stock: 10mm Titan DIN766 = approximately 297mm; 10mm ISO = approximately 316mm

DETERMINING THE CORRECT CALIBRATION

N.B. The measurement for an old chain may be a little longer than new due to a degree of wear and elongation in use

10mm Titan Grade 43 Anchor Chain is generally suitable for yachts up to approximately 16 metres, length overall
Factor in:
Displacement : Length ratio
Your cruising intentions
The anticipated anchorage conditions e.g. depth, seabed holding characteristics, the length of fetch and degree of exposure to prevailing winds
The length of chain that will be deployed and any extra scope provided by an anchor warp
The weight and design of anchor

Your anchor rode is only as strong as the weakest link so ensure that all your connectors and shackles are rated to the requisite break load

Titan Anchor Chain exceeds DIN766 specifications

Titan Chain Diagram

10mm ISO Dimensions
Chain Size  Outside Width   Outside Length  Pitch 
10mm 34mm  48mm 30mm
10mm ISO Specification
Maximum Pin Ø Working Load Limit MBL  Weight per metre
13mm 1800kg 7200kg 2.3kg
10mm DIN766 Dimensions
Chain Size  Outside Width   Outside Length  Pitch 
10mm 34mm  46mm 28mm
10mm DIN766 Specification
Maximum Pin Ø Proof Load MBL Weight per metre
13mm 1800kg 7200kg 2.35kg

MBL = Manufacture Minimum Break load

Chain size is the diameter shown in red on the diagram

Maximum Pin Ø (Diameter) refers to the largest pin which will fit comfortably in the end link of 10mm chain whether it is DIN766 or ISO

Select the largest possible galvanised shackle or anchor connector by pin diameter to fit the chain

Quality Control and Accountability
Every length of chain is checked and labelled with the manufacturer, the date received and a corresponding batch number when it arrives.
The batch number is then recorded at the point of sale.
Every chain order is therefore traceable and accountable to the manufacturer Test Certificate

A copy of the corresponding Titan Test Certificate is available with your order on request

  • Purchase Type - Per metre
  • Chain Size - 10mm
  • Chain Finish - Hot Dipped Galvanised
  • Boat Length (Anchoring) - 14-16 metres up to 16 tonnes
  • Boat Length (Anchoring) - 16-18 metres up to 20 tonnes
  • Boat Length (Anchoring) - 12-14 metres up to 13 tonnes

Chain Markers

Chain Markers

£5.00
Quick Link
Maillon Rapide, stainless steel rated link
Force 7 Grade 70 anchor chain shackle link, showing all three sizes

AnchoRight 8mm Chain Markers - one colour with plate

Titan 10mm DIN766 Certificate

Sample Certificate - Canada Metal Pacific Titan 10mm DIN766 Grade 43 Calibrated Anchor Chain

Download (392.66KB)

Titan 10mm ISO Chain Certificate

Sample Certificate - Canada Metal Pacific Titan 10mm ISO Grade 43 Calibrated Anchor Chain

Download (392.66KB)

Titan Grade 43 Specification

Canada Metal Pacific Specification for Titan Grade 43 Calibrated Anchor Chain

Download (220.38KB)