100 Metre Reel Deal - LIROS Dynamic Plus Cruising Dyneema

Minimum rate per metre

Upgraded dyneema performance

Cut to length in house

Wound on a plastic LIROS reel

Ideal for sheets, halyards, control lines
The logical premium polyester choice for extended performance cruising

£ 343.00 inc VAT

Calculate Delivery Cost

100 metre reel deals provide the best rate per metre, cut to length and rewound onto a LIROS reel

LIROS Dynamic Plus Article 02004 Cruising Dyneema SK78

Cover: Close Weave 32plait 100% Polyester (8mm 24plait) smooth construction.
Core: Plaited Dyneema® SK78 with additional inner plait construction - LIROS-Heat-Stretch-System.

Regatta Performance hard wearing, low stretch halyard for competitive cruiser/racer sailors - working load stretch < 2%.

LIROS Dynamic Plus - slightly thinner Dyneema core than LIROS Racer Dyneema with an extra inner cover plait to compensate - the result is a solid round construction with excellent firm shape retention under load e.g. around sheaves and winches.
Better all round performance than Marlow D2 Club.
The logical choice for competitive cruising/racing without going to the expense of Racing Dyneema.

Diameters and Colours:
8mm, 10mm, 12mm - White with colour coding in Blue, Green, Red and Yellow plus full colour Red, Plain White (with LIROS marker yarn) and Steel Blue
14mm - White with colour coding in Blue, Red and Yellow plus full colour Steel Blue

LIROS exclusive Steel Blue spin dyed Polyester is 30% more abrasion resistant than other colours in the equivalent polyester yarn.

LIROS Dynamic Plus Positive Factors:

  • Excellent smooth handling
  • Non kinking, balanced braiding
  • Excellent holding power in cleats and clutches
  • Good Grip around winches
  • Solid shape retention around winches - firm, compact braid construction doesn't flatten
  • Runs freely through block and sheaves
  • Spliceable - advanced core dependent splice
  • Low stretch - LIROS-Heat-Stretch-System

LIROS-Heat-Stretch-System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance.

N.B. The inner cover plait is not load bearing and a certain amount is removed as part of the core dependent splice resulting in a reduced diameter over a short length. Although it looks thin, the strength of the splice and the rope is not compromised.

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end.

DiameterLBLMax SAWLS
8mm2300kg20sqm< 2%
10mm3100kg30sqm< 2%
12mm4800kg40sqm< 2%
14mm6500kg70sqm< 2%

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area
WLS = LIROS stretch at working load < = less than

You may also like