50 metre Hank Deal - LIROS Dynamic Plus Cruising Dyneema

50 metre Hank Deal - LIROS Dynamic Plus Cruising Dyneema

Reduced Rate per metre

Polyester cover, Dyneema core

Supplied loose in a sack

Cut to length in house

LIROS ROPE STOWAGE BAGSare handy
for portage and onboard storage

Ideal for sheets, halyards, control lines
The logical premium polyester choice for extended performance cruising

£ 206.00 inc VAT

Calculate Delivery Cost

50 metre hank deals offer a reduced rate per metre, cut to length and supplied in a hank or loose in a sack.

LIROS Dynamic Plus Article 02004 Cruising Dyneema SK78

  • Cover: Close Weave 32plait 100% Polyester (8mm 24plait) smooth construction
  • Core: Plaited Dyneema® SK78 with additional inner plait construction - LIROS-Heat-Stretch-System 

Regatta Performance, hard wearing, low stretch halyard for competitive cruiser/racer sailors - working load stretch < 2%

LIROS Dynamic Plus - slightly thinner Dyneema core than LIROS Racer Dyneema with an extra inner cover plait to compensate - the result is a solid round construction with excellent firm shape retention under load e.g. around sheaves and winches
Better all round performance than Marlow D2 Club
The logical choice for competitive cruising/racing without going to the expense of Racing Dyneema

Diameters and Colours:
8mm, 10mm, 12mm - White with colour coding in Blue, Green, Red and Yellow plus full colour Red, Plain White (with LIROS marker yarn) and Steel Blue
14mm - White with colour coding in Blue, Red and Yellow plus full colour Steel Blue

LIROS exclusive Steel Blue spin dyed Polyester is 30% more abrasion resistant than other colours in the equivalent polyester yarn

LIROS Dynamic Plus Positive Factors:

  • Excellent smooth handling
  • Non kinking, balanced braiding
  • Excellent holding power in cleats and clutches
  • Good Grip around winches
  • Solid shape retention around winches - firm, compact braid construction doesn't flatten
  • Runs freely through block and sheaves
  • Spliceable - advanced core dependent splice
  • Low stretch - LIROS-Heat-Stretch-System


LIROS-Heat-Stretch-System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance

N.B. The inner cover plait is not load bearing and a certain amount is removed as part of the core dependent splice resulting in a reduced diameter over a short length. Although it looks thin, the strength of the splice and the rope is not compromised

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end

Diameter LBLMax SAWLS
8mm2300kg20sqm< 2%
10mm3100kg30sqm< 2%
12mm4800kg40sqm< 2%
14mm6500kg70sqm< 2%

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area
WLS = LIROS stretch at working load
< = less than

You may also like