Clearance LIROS Regatta 2000

The Jimmy Green Rigging Team optimise the use of as many reel ends as they can in servicing our custom build orders, but inevitably there are always some left on the shelf.
These are available at a reduced rate per metre.

Please note that if you are trying to add a pair to your basket, but the website is not responding, it means that there is only one length available.

The Jimmy Green Rigging Team can add a splice to either end if required. The individual finish is available to purchase online:

THE JIMMY GREEN RIGGING TEAM PROFESSIONAL FINISH

Liros Regatta 2000 (article 02000) Construction
Cover:1:1 plaited special steel blue high twist polyester with 30% more wear resistance.
Core: Braided Dyneema SK78 core, LIROS-Heat-Stretch-System, LIROS Coating System with a very thin extra traction layer - 

Diameters and Colours:
8mm, 10mm, 12mm 14mm - Steel blue with yellow, red and blue colour code options 

LIROS Regatta 2000: Facts, Features and Plus Factors

• Very low stretch < 1.5% at working load
• High load capacity
• Excellent smooth handling
• Non kinking, balanced braiding
• Excellent holding power in cleats and clutches
• Good Grip around winches
• Solid shape retention around winches - firm, compact braid construction doesn't flatten
• Runs freely through blocks and sheaves
• Spliceable - advanced core dependent splice
• LIROS-Heat-Stretch-System
• LIROS Coating System

LIROS-Heat-Stretch-System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance

LIROS Coating System - polyurethane impregnation process improves resistance to abrasion and protects against UV damage by up to 50%.

N.B. LIROS Regatta has an inner traction layer which is not load bearing and a certain amount is removed as part of the core dependent splice

The LIROS manufacturing process produces a balanced braid on braid construction with consistency second to none

LIROS Manufacturing Excellence and Consistency: meticulous attention to exacting standards ~ decades of experience ~ modern factory with state of the art, computer programmed twisting and braiding machinery

The LIROS Regatta polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.

Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end

Liros Regatta 2000 Dyneema Specifications: Break Load, Maximum Sail Area and Working Load Stretch

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area in square metres
WLS = LIROS stretch at working load
< = less than