LIROS Classic Dynamic Plus Sheets

LIROS Dynamic Plus Article 02004 Cruising Dyneema SK78 is the preferred choice for committed cruising/racing yachts looking for regatta performance.

LIROS Classic Dynamic Plus is a hard wearing, high load capacity, low stretch halyard, sheet or control line for hard working applications on classic cruising yachts.

LIROS Classic Dynamic Plus is the logical choice when budget restraints don't allow for LIROS Racer Article 02001.

Jimmy Green Marine have a longstanding business partnership with LIROS going back over 4 decades, andwe have used our influence to good effect with the exclusive addition of LIROS Dynamic Plus Cruising Dyneema to our Classic Ropes range.

LIROS Dynamic Plus 02004 Technical Specification:

Cover: Close Weave 32plait 100% Polyester (8mm 24plait) smooth construction
Core: 12 strand plaited Dyneema® SK78 with additional inner plait construction - LIROS-Heat-Stretch-System LIROS Dynamic Plus has an slightly thinner Dyneema core than LIROS Racer Dyneema with an extra inner cover plait to compensate - the result is a solid round construction with excellent firm shape retention under load e.g. around sheaves and winches

Diameters and Colours: 8mm, 10mm, 12mm - full colour natural beige with no LIROS marker yarn

LIROS Classic Dynamic Plus Positive Points:

• Technologically advanced specification in a Classic colour
• High Load Capacity
• Working load stretch <2%
• Close weave 32plait 100% polyester cover
• Tough and resilient to wear/abrasion
• Excellent smooth handling
• Non kinking, balanced braiding
• Excellent holding power in jammers, cleats and clutches
• Good Grip around winches
• Solid shape retention around winches - firm, compact braid construction doesn't flatten under load
• Runs freely through block and sheaves
• Spliceable - advanced core dependent splice
• Low stretch - LIROS-Heat-Stretch-System

LIROS-Heat-Stretch-System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance N.B. The inner cover plait is not load bearing and a certain amount is removed as part of the core dependent splice resulting in a reduced diameter over a short length. Although it looks thin, the strength of the splice and the rope is not compromised.

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.

Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end.

LBL = LIROS Break Load MAX
SA = LIROS maximum recommended Sail Area
WLS = LIROS stretch at working load
< = less than

The Jimmy Green Rigging Team are happy to splice your existing shackles onto your new lines. Send or drop them in to the Rigging Team, but don't forget to let us know, so that we don't splice your lines before we receive the shackles :-(