Blue Wave Dyneema Rope Fork
PRB-BW-RP840804
Designed for Dyneema Rigging Termination
Unique internal former for sympathetic turning radius and secure termination
Advanced Blue Wave casing design provides UV and abrasion protection for the rope splice
Highly polished stainless steel AISI 316
Simple to strip down and reassemble for inspection and maintenance
Select by line diameter 4 to 10mm
More Information
Accessories
Blue Wave Dyneema Rope Fork Terminal, manufactured from polished AISI316 marine-grade stainless steel.
Blue Wave has developed a range of rope terminals to complement the advantages of Dyneema® and Vectran® lines for running and standing rigging.
The Blue Wave Technical Team has designed a unique internal bail (also known as a bone or former) for the line to pass around and back into the locking tuck and splice.
| Part | Rope Ø | Pin | A | B | C | D | KW | L | MBL |
|---|---|---|---|---|---|---|---|---|---|
| BW-RP840804 | 4mm | 8mm | 6.5mm | 16mm | 9mm | 16mm | 11mm | 53mm | 1900kg |
| BW-RP841005 | 5mm | 9.5mm | 9mm | 21mm | 11mm | 21mm | 16mm | 63mm | 3200kg |
| BW-RP841206 | 6mm | 12.7mm | 11mm | 26mm | 13.5mm | 25mm | 19mm | 80mm | 5500kg |
| BW-RP841608 | 8mm | 16mm | 14mm | 32mm | 17mm | 39mm | 29mm | 108mm | 8000kg |
| BW-RP841910 | 10mm | 19mm | 18mm | 35mm | 21mm | 45mm | 33mm | 129mm | 11000kg |
MBL = Manufacturer Break Load
Dyneema Rope End Fitting Instructions
Simple to fit to existing rigging screws and deck fittings:
Parts illustration - 3 parts = Housing - Bone - Eye
Slide the housing over the rope
Splice the Dyneema line around the bone
Pull the spliced bone back into the housing - ensure that the splice and bone are seated properly.
Screw the housing and the eye firmly together - the thread can be locked with Loctite
