Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
petersen hi mod stud
petersen hi mod stud
petersen hi mod stud

Split pin hole to suit open body turnbuckle

UNF Thread

DIY swageless hand tool operation

Superior HI-Mod Compression design

Select the correct wire option:

Standard 1x19 or Compact Strand 1x7

Check the chart for dimensions

£40.00

More Information
Accessories

Petersen Hi-Mod Swageless Compression Terminal - Imperial Stud

Petersen Hi-Mod terminals are designed for easy assembly by using an exclusive ‘twist-click’ system.

This method is extremely beneficial on large diameter or Compact Strand wire where the strands are stiff and difficult to bend.

Hi-Mod twist and click assembly:

  • Hold the end fitting against the crown ring
  • Twist the body in the same direction as the lay of the wire while applying upward pressure.
  • The outer wire strands will click into position on the crown
  • If necessary, use a small screwdriver to reposition any strands that have inadvertently crossed

Petersen have producd a very informative video illustrating the twist and click method and how to fit their Hi-Mod terminals to wire successfully:

HI MOD INSTRUCTIONAL VIDEO

Petersen Hi-Mod Stud Terminal Diagram

PetersenTLAFSAFBWeight
3mm 1/4'' Stud 47mm 68mm 6mm 9.5mm 24g
4mm 1/4'' Stud 47mm 68mm 8mm 11mm 35g
4mm 5/16'' Stud 54mm 77mm 8mm 11mm 42g
4mm 3/8" Stud 68mm 87mm 8mm 11mm 58g
5mm 5/16'' Stud 54mm 82mm 9mm 14mm 65g
5mm 3/8'' Stud 68mm 91mm 9mm 14mm 75g
5mm 7/16" Stud 75mm 97mm 9mm  14mm 85g
6mm 3/8'' Stud 68mm 97mm 11mm 17mm 110g
6mm 7/16'' Stud 75mm 101mm 11mm 17mm 130g
6mm 1/2" Stud 90mm 119mm 11mm 17mm 145g
7mm 1/2'' Stud 90mm 121mm 14mm 20mm 199g
8mm 1/2'' Stud 90mm 129mm 16mm 22mm 297g
8mm 5/8'' Stud 100mm 137mm 16mm 22mm 347g
10mm 5/8'' Stud 100mm 143mm 17mm 26mm 458g
10mm 3/4" Stud 120mm 163mm 19mm 26mm 760g
11mm 3/4" Stud 120mm 163 mm 19mm 26mm 790g
12mm 3/4" Stud 120mm 173 mm 22mm 32mm 892g
Petersen Split Pins
Petersen Split Rings