Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Petersen Hi-Mod Swageless Compression Terminal - Toggle End
Petersen Hi-Mod Swageless Compression Terminal - Toggle End
Petersen Hi-Mod Swageless Compression Terminal - Toggle End

Machined eye terminal with Strap Toggle

Clevis pin and split pin included

DIY swageless hand tool operation

Superior HI-Mod Compression design

Select the correct wire option: Standard 1x19 or Compact Strand 1x7

Check the chart for dimensions


More Information

Petersen Hi-Mod Swageless Compression Terminal - Toggle End

Petersen Hi-Mod terminals are designed for easy assembly by using an exclusive ‘twist-click’ system.

This method is extremely beneficial on large diameter or Compact Strand wire where the strands are stiff and difficult to bend.

Hi-Mod twist and click assembly:

  • Hold the end fitting against the crown ring
  • Twist the body in the same direction as the lay of the wire while applying upward pressure.
  • The outer wire strands will click into position on the crown
  • If necessary, use a small screwdriver to reposition any strands that have inadvertently crossed

Petersen have producd a very informative video illustrating the twist and click method and how to fit their Hi-Mod terminals to wire successfully:


Hi-Mod Toggle End Terminal Diagram

Item P=Pin ø C T L A/F Weight
3mm Toggle 6mm 14mm 8mm 45mm 9.5mm 37g
4mm Toggle 8mm 18mm 9mm 53mm 11mm 71g
5mm Toogle 9.5mm 21mm 11mm 64mm 14mm 125g
6mm Toggle 11mm 25mm 13mm 78mm 19mm 258g
7mm Toggle 12.7mm 27mm 15mm 89mm 20mm 327g
8mm Toggle - DS 12.7mm 27mm 15mm 92mm 22mm 397g
8mm Toggle - US 16mm 36mm 19mm 116mm 22mm 700g
10mm Toggle 16mm 36mm 19mm 116mm 26mm 800g
12mm Toggle 19mm 45mm 22mm 157mm 32mm 1242g
14mm Toggle 22mm 53mm 25mm 174mm 36mm 2302g

DS = Down size
US = Up size

Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

Petersen Clevis Pin
Petersen Split Pins
Petersen Split Rings