50 metre Hank Deal - LIROS Control XTR

50 metre cut length - LIROS Control XTR

Reduced Rate per metre

Ultimate Regatta performance

Ultra high load, low stretch line

Hard wearing and hard working

Cut to length in house

LIROS Rope Stowage Bagsare handy
for portage and onboard storage

£ 500.00 inc VAT

Calculate Delivery Cost

50 metre lengths are available at a reduced rate per metre

N.B. normally supplied as a loose length of rope in a sack rather than in a hank making it much easier to deploy.

Can be supplied re-wound in house onto a LIROS reel by email request.

The Jimmy Green Rigging Team can finish the ends with e.g. a splice or whipping:

The Jimmy Green Professional Rigging Team Finish

LIROS Control XTR is the ultimate high performance solution for all running rigging applications including Sheets, Halyards and Control Lines

LIROS Control XTR
 (article 02224) Construction:

Cover: 32plait Blended 50/50 Technora/high tenacity Polyester 
Core: Super prestretched and coated 12 strand braided Dyneema SK99  - the strongest, lowest stretch dyneema fibre

LIROS Control XTR Facts, Features and Plus Factors:
  • Very good rope to handle in testing conditions
  • Exceptional holding power - LIROS Grip Factor 10 - Grip Factor is expected to improve with use
  • Ultimate wear and heat resistance
  • Superb solid shape retention under racing loads
  • All round excellence around winches and through clutches
  • Very high tensile load capacity coupled with minimal stretch - Liros Heat Stretch System - <1.0% at working load
  • Spliceable - advanced core dependent splice
  • Taperable
  • Liros Coating System - enhanced wear resistance, UV protection and water impermeability on exposed core
  • Excellent cover to core power transference
  • Non kinking, balanced braiding
  • Runs freely through blocks and sheaves

LIROS-Heat-Stretch-System = unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance

LIROS Coating System = polyurethane impregnation process which improves resistance to abrasion and protects against UV damage by up to 50%.

The LIROS manufacturing process produces a balanced braid on braid construction with consistency second to none

LIROS Manufacturing: meticulous attention to exacting standards ~ decades of experience ~ modern factory with state of the art, computer programmed twisting and braiding machinery

The Technora/Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over (attached) using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end


Diameter LBLWLS
6mm2800kg< 1.0%
8mm6250kg< 1.0%
10mm8000kg< 1.0%
12mm11200kg< 1.0%
14mm1410kg< 1.0%
LBL = LIROS Break Load
WLS = LIROS stretch at working load
< = less than

And if you know Ferdi...smiley-cool.gif
LIROS Control XTR is recommended by Ferdinand Gerz (Sailing Team Germany)

You may also like