Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00

LIROS 12mm Regatta 2000 - Sheets, Halyards, Control Lines

Designed for the high loads on racing halyards and control lines. The proven, uncompromising choice for demanding Regatta Sailing

More Information

Liros Regatta 2000 (article 02000)

Regatta Racing Performance - hard wearing, very low stretch, high load capacity line engineered for best performance.

Cover:1:1 plaited special steel blue high twist polyester with 30% more wear resistance.
Core: Braided Dyneema SK78 core, LIROS-Heat-Stretch-System, LIROS Coating System with a very thin extra traction layer

Diameters and Colours:
8mm, 10mm, 12mm - Steel blue with yellow, red and blue colour code options 
14mm - avaiable to order from the LIROS factory

LIROS Regatta 2000:

  • Very low stretch < 1.5% at working load
  • High load capacity
  • Excellent smooth handling
  • Non kinking, balanced braiding
  • Excellent holding power in cleats and clutches
  • Good Grip around winches
  • Solid shape retention around winches - firm, compact braid construction doesn't flatten
  • Runs freely through blocks and sheaves
  • Spliceable - advanced core dependent splice
  • LIROS-Heat-Stretch-System
  • LIROS Coating System

LIROS Heat Stretch System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance

LIROS Coating System - polyurethane impregnation process improves resistance to abrasion and protects against UV damage by up to 50%.

N.B. The inner traction layer is not load bearing and a certain amount is removed as part of the core dependent splice

The LIROS manufacturing process produces a balanced braid on braid construction with consistency second to none
LIROS Manufacturing: meticulous attention to exacting standards ~ decades of experience ~ modern factory with state of the art, computer programmed twisting and braiding machinery

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end

Diameter  LBL Max SA WLS
8mm 3800kg 30sqm < 1.5%
10mm 5000kg 50sqm < 1.5%
12mm 7200kg 70sqm < 1.5%
14mm 9500kg 90sqm < 1.5%
16mm 12600kg 100sqm < 1.5%

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area in square metres
WLS = LIROS stretch at working load
< = less than<?p>

  • Purchase Type - Custom Build
  • Rope Fibre - Polyester/Dyneema
  • Rope Diameter - 12mm
  • Sail Area (Racing) - up to 60 m2
  • Sail Area (Racing) - up to 70 m2
  • Sail Area (Cruising) - up to 70 m2
  • Sail Area (Cruising) - up to 60 m2