Jimmy Green/Barton Low Friction Rings - Mark 2
JGM04195-B60451
This is the Jimmy Green Mark 2 Version
V2 = an endless Dyneema loop spliced around a Low Friction Ring with a Brummel Lock
Produced to order, subject to splicing lead times
Spliced and finished in-house by the Jimmy Green Rigging Team
The loop facilitates easy cow hitch attachment
Select your size by the internal diameter of the ring:
| Internal Ø | Barton Recommended Maximum Rope Ø |
|---|---|
| 6mm | 3mm |
| 9mm | 4mm |
| 12mm | 6mm |
| 16mm | 10mm |
| 22mm | 12mm |
| 28mm | 16mm |
Barton Maximum Rope Ø = the maximum diameter line that Barton recommends using through the ring
More Information
The Mark 2 Version - Jimmy Green/Barton Low Friction Ring with Dyneema Loop
The V2 variation is produced from Liros D-Pro 100% pure Dyneema® SK78 rope and a Barton Low Friction Ring.
However, the V2 features a Brummel lock splice to fix the Dyneema loop around the Low Friction Ring, creating a tight fit and a secure attachment.
The important difference from the Mark 1 version is that the Brummel splice method doubles the content of Dyneema in the loop section, and therefore doubles the diameter.
This makes the loop very strong and robust, but the extra diameter should be taken into consideration for your application.
The Brummel Lock Splice also makes the attachment to the ring more secure than stitch and whip seizing.
Jimmy Green low friction rings with Dyneema loop are Brummel spliced in-house by the Jimmy Green Rigging Team.
The Dyneema loops are produced to order, and therefore subject to splicing order lead times.
There are six sizes of Low Friction Ring, each with a Jimmy Green designated Dyneema diameter and loop length.
If you wish to specify a different diameter or loop length, please contact us via email and we can quote accordingly.
Barton lightweight high-load eyes are suitable for a variety of uses on board:
- Lazy Jacks
- Barber haulers
- Backstay cascades
- Mast base tidies
- Stanchion lead eyes
- Emergency blocks
- Toe rail blocks
- In fact, anywhere that a line needs re-routing under static load
| JGM/Barton |
Overall Length |
Internal Loop Length |
Max diameter pole | D-Pro Ø used to form loop | Internal Hole Ø | Barton Maximum Rope Ø | External Ø | Approximate Loop Thickness |
|---|---|---|---|---|---|---|---|---|
| JGM04189-B60451 | 165mm | 120mm | 30mm | 4mm | 12mm | 6mm | 26mm | 10mm |
| JGM04190-B60452 | 245mm | 180mm | 40mm | 5mm | 16mm | 10mm | 38mm | 12mm |
| JGM04191-B60453 | 280mm | 210mm | 50mm | 6mm | 22mm | 12mm | 52mm | 13mm |
| JGM04192-B60454 | 400mm | 300mm | 60mm | 8mm | 28mm | 16mm | 65mm | 17mm |
Length = approximate inside length overall when stretched out straight
Internal Hole Ø = the internal diameter of the ring
Barton Maximum Rope Ø = the maximum diameter line that Barton recommends using through the ring
SWL = Barton Safe Working Load
Approximate Loop Thickness = the approximate finished diameter formed from the double braided section.
N.B. External Ø is the outside width dimension across the ring
