Petersen Stainless Insulators - Swage and Swage

2 Swage terminals.

Swage ends must be professionally finished.

2 insulators are required to create an insulated backstay.

£ 120.49

£ 141.75

-15%

Calculate Delivery Cost

The only fail safe rigging insulator for wire available on the market today, the Hi-MOD backstay insulator has an internal ball-socket in the main body.

The nut is insulated from the stainless steel body by a Tufnol™ spacer, preventing electrical transference to the insulator body or opposite terminal. Should, for any reason, the Tufnol™ be compromised, the nut will bottom out against the stainless housing.

While the backstay will loosen, the insulating studs will remain attached to the insulator body, allowing the rig to be re-tensioned until a repair can be made.

Wire Diameter (mm)Pin Size (mm)Hole Size (mm)Part NoS-L (mm)
61111.1RISS06101
712.712.7RISS07120
81414.28RISS08140
101616.2RISS10142
121919.05RISS12168
142222.2RISS14196
162525.4RISS16226