Petersen Closed Body Rigging Screw with Compression Stud and Toggle

Closed body rigging screw

Manufactured from stainless steel grade 316L.

Complete with locking nuts and pins

Sizes from 1/4 to 5/8

Fork End complete with Pin

DIY termination

£ 48.80 inc VAT

Calculate Delivery Cost

Petersen Closed Body Rigging Screw with Compression Stud and Toggle

Petersen closed 'rigging screw’ body is made from stainless steel grade 316L.

Sizes up to 1/2” are manufactured from seamless (no welds) pressure-tube.

Sizes 5/8” and above have aluminium bronze thread inserts to prevent galling.

Product CodeWire (mm)Thread ("UNF))P (mm)C (mm)T (mm)Min L (mm)Max L (mm)Nominal Weight (G)
RSCT0331/46.014.08.015221776
RSCT0445/168.018.09.0173246146
RSCT0553/89.521.011.0209304265
RSCT0667/1611.025.013.0263338452
RSCT0771/212.727.015.0274399663
RSCT08DS81/212.727.015.0282407761
RSCT08US85/816.036.019.03605081541
RSCT10105/816.036.019.03655131541
RSCT12123/419.045.022.04365982620
RSCT14147/822.053.025.04896764308

NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole.

For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

You might also consider