Petersen Closed Body Rigging Screw with Swage and Eye

Closed body rigging screw manufactured from stainless steel grade 316L.

Complete with locking nuts and pins.

Sizes from 1/4 to 5/8

Professional swaging required.

£ 20.25 inc VAT

£ 22.50

-10%

Calculate Delivery Cost

Sizes up to 1/2” are manufactured from seamless (no welds) pressure-tube.

Sizes 5/8” and above have aluminium bronze thread inserts to prevent galling.

Can be slotted for locking pins (please enquire).

Product CodeWire (mm)Thread ("UNF)H (mm)T (mm)C (mm)Min L (mm)Max L (mm)Nominal Weight (G)
RSSE0331/46.355.011.011518562
RSSE04DS41/46.355.011.011718763
RSSE0445/168.06.514.0142217106
RSSE05DS55/168.06.514.0142217108
RSSE0553/89.537.817.0170270194
RSSE06DS63/89.537.817.0173273197
RSSE0667/1611.19.520.0190295298
RSSE07DS77/1611.19.520.0194299302
RSSE0771/212.711.523.0225350466
RSSE08DS81/212.711.523.0225350500
RSSE0885/814.2813.524.0285410968
RSSE10105/816.015.029.02904451032
RSSE12123/419.0517.534.03355051626
RSSE14147/822.221.540.03755702657

NOTE: 
Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

You may also like