Quick-drying satin finish
Good resistance to seawater and sunlight
For interior and exterior use above the waterline
N.B. Restricted courier options apply
750ml tins: wrapped meticulously for despatch
Dents may have occurred in transit, but they do not constitute a fault unless there is evidence of significant oxidation or content seepage.
Satin Yacht Varnish
Hempel Dura-Satin Varnish is quick to cure, creating a hard and durable satin surface within hours of application.
Hempel satin varnish coatings protect surfaces against alcohol and cleaning materials
Hempel Durs-satin is suitable for applications inside or outside, above the waterline.
Hempel Preparation and Application Recommendation
- On a previously coated surface: Clean with Surface Cleaner, dry, abrade to remove loose matter and to key the surface, remove dust using a vacuum cleaner, and apply Dura-Satin Varnish
- On untreated wood: Clean with Surface Cleaner or Degreaser, dry, abrade to remove loose matter and to key the surface, remove dust using a vacuum cleaner. Seal and prime with Dura-Gloss Varnish thinned by 20% with Thinners Number 1, apply 2-3 coats of unthinned Dura-Gloss Varnish, and then apply the final coat of Dura-Satin Varnish
Thinners may be added to assist with an application if necessary.
Stir all products well before use.
|Touch Dry Time
|Re-coat Time, Mimimum and Maximum
|8 hours - 4 days
|Thinner no 1
|17m2 per litre
|4 hours - 2 days
|Should not be necessary