Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Wichard HR snapshackle thimble swivel eye
Wichard HR snapshackle thimble swivel eye

Wichard HR Snap Shackle with Thimble Swivel Eye

Designed to take a rope without the need for an additional thimble

Pevents point loading on the pin

Available in 2 sizes


More Information

Designed to be spliced directly onto a line without the need for an additional tear drop stainless steel thimble

Nylon moulding around the eye allows the line to be spliced tight to the shackle

HR = High Resistance = Forged from 17.4ph top quality marine grade stainless steel with increased breaking strain compared with standard top quality marine grade stainless steel.

Forging not only optimises the stainless steel in terms of strength but also in the ability to yield a little under extreme load before ultimate failure
The moulded thimble also prevents any pin point load on the pin
The Skipper's regular safety rig check should therefore give notice and an opportunity for replacement.

The plunger pin design and manufacturing process results in an assembly which will not come apart, even after extended use.

The plunger pin is ergonomically designed to open easily but also features a ring for attaching a release lanyard.

WD-2493 Thimble Eye 95mm 16mm 12mm 960kg 2000kg
WD-2495 Thimble Eye 110mm 21mm 14mm 1280kg 2400kg

Measurement A refers to the maximum usable diameter when closed i.e. the biggest diameter rope or fitting that it will reasonably clip on to.

Measurement B refers to the maximum rope diameter for the halyard, sheet or control line

WLL = working load limit
MBL = Manufacturer Break Load