Marlow D2 Competition Halyards

Marlow D2 Competition Halyards

Marlow D2 Competition - now discontinued - better all round performance than it's replacement Marlow D2 Club - less dyneema content but less expensive than D2 Racing

Cover: 16plait 100% Polyester

...

Marlow D2 Competition - now discontinued - better all round performance than it's replacement Marlow D2 Club - less dyneema content but less expensive than D2 Racing

Cover: 16plait 100% Polyester

Core: 12 strand braided Dyneema® SK78 with additional inner traction jacket.

Performance Cruising, low stretch halyard for competitive cruising and occasional racing.

The Jimmy Green Rigging Team are happy to splice your existing shackles onto new halyards.

Diameter8mm10mm12mm
Weight p100m4.83kg7.63kg9.71kg
MBL1520kg2680kg4930kg

MBL = Marlow minimum break load

N.B. The inner cover plait is not load bearing and a certain amount is removed as part of the core dependent splice resulting in a reduced diameter over a short length. Although it looks thin, the strength of the splice and the rope is not compromised.

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end.

Marlow D2 Competition Datasheet