LIROS Slide Protect -XTR - Per metre

LIROS Dyneema Slide Protect XTR

Abrasion resistant chafe sleeve

100% Dyneema SK78

LIROS XTR Coating System

Cut and abrasion resistant

Excellent rope cover for high wear areas

Workable hollowbraid construction

Consult the sizing guide below
 
Available in Black in 3 sizes

Price per metre

£ 3.75 inc VAT

Calculate Delivery Cost
LIROS Slide XTR Abrasion Resistant Rope Cover, article 10148 is perfect for providing extra protection around areas of high abrasion e.g. halyard tips, high load sheet areas or even where a line rubs continuously over the deck.

Special LIROS design and manufacture from Dyneema SK78 with XTR coating in a 48 plait hollowbraid construction for feeding over an existing line.

LIROS Slide Protect XTR Facts, Features and Plus Factors:
  • Not suitable for clutches and jammers
  • Colour: Carbon Black
  • LCS = LIROS XTR Polyurethane Coating System
  • LIROS Grip Factor = 3
  • Very workable
  • Excellent resistant to snagging, tearing or cutting
  • Excellent resistance to wear and abrasion
  • Excellent UV resilience

Quick Instructions:
Secure one end with a tapered bury and/or neat and extremely tight stitch and whipping - take care to smooth out any slack in the cover and secure in the same way as the first end.  


LIROS Advisory:
LIROS Slide Protect XTR is not suitable for use in clutches and jammers.


For extra grip and wear resistance in clutches, use LIROS GRIP PROTECT


Choose the Slide Protect you require by matching the diameter of your existing line to the size range:
SizeLIROS ArticleConstructionMBLMinimum Ø Maximum Ø
5-10mm

10148-0810

48 plait1600kg5mm10mm
8-12mm10148-121448 plait2500kg8mm12mm
14-22mm

10148-1624

48 plait5500kg14mm22mm
MBL = Manufacturer (LIROS) Break Load

Minimum Ø and Maximum Ø
The table above refers to LIROS minimum and maximum recommended line diameters.


Jimmy Green Advisory:

It is a tricky operation to successfully sheath a dyneema chafe sleeve over any line and especially over the LIROS minimum and maximum recommendations.

Useful tips on Slide Protect:
Take particular care not to snag a strand or upset the weave more than necessary.
Open up the diameter of the sleeve and gently push onto the end of the line as far it will go easily.
Then smooth the sleeve forward imitating a 'concertina' or 'caterpillar' movement.
Once the sleeve is in position, use a leather glove to smooth it outward from the middle to compress it over the line as tightly as possible.
Secure each end by separating and tapering the sleeve.
The taper can be inserted into the cover or left external - either way the ends should be covered and secured by a whipping.

Astute positioning of Slide Protect is well worth the effort for offshore and ocean cruising, extending the life of your halyards, sheets and control lines.

Please note, this type of sleeving is not suitable for use in clutches and jammers.

For extra grip and wear resistance in clutches, use LIROS GRIP PROTECT




You may also like