Bonomi Joy Self Tailing Cleat - 24v 110kg

The Bonomi self tailing cleat is equally effective at the stern or at the bow. It can be installed centrally at the bow or stern or as a pair alongside your existing side-deck cleats.

Warps must still be handled during operation of the self tailing cleat. However, handling loads and stress for the operative will be significantly reduced.

Safe operational tension load up to 100kg (100N). The tailing speed of the winch is fast enough to facilitate the quick retrieval of slack line. The cleat motor is strong enough to load sufficient tension into a line to move a boat. Load the line using the cleat then allow the natural elasticity in the line to do the work. Repeat this cycle as often as required.

Manufactured in AISI 316L stainless steel

Motor voltage 24V

NB Mooring line recommendation above is incorrect. The correct diameters are 20-28mm.