Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Bonomi 24v 300kg B2A23H below deck
Bonomi 24v 300kg B2A23H
Bonomi 24v 300kg B2A23H below deck

Fast and effortless practical mooring

Self tailing cleats safely reduce mooring line loads

Produced in Stainless Steel AISI 316L

For boats approximately 50 to 70 feet in length

Compatible with braided, 3 and 8 strand mooring lines 20mm - 28mm 

£3,600.00

Pay later with PayPal Credit
More Information
Downloads

The Bonomi self tailing cleat is equally effective at the stern or at the bow. It can be installed centrally at the bow or stern or as a pair alongside your existing side-deck cleats.

Warps must still be handled during operation of the self tailing cleat. However, handling loads and stress for the operative will be significantly reduced.

Safe operational tension load up to 300kg (3120N). The tailing speed of the winch is fast enough to facilitate the quick retrieval of slack line. The cleat motor is strong enough to load sufficient tension into a line to move a boat. Load the line using the cleat then allow the natural elasticity in the line to do the work. Repeat this cycle as often as required.

Manufactured in AISI 316L stainless steel

Motor voltage 12V

Bonomi 24v 300kg specifications

NB Mooring line recommendation above is incorrect. The correct diameters are 20-28mm.

24v 300kg Specification Sheet

Bonimi Self Tailing Cleat 24v 300kg

Download (766.37KB)