100 metre Reel - LIROS Regatta 2000

Liros Regatta 2000 (article 02000)
Cover:1:1 plaited special steel blue high twist polyester with 30% more wear resistance.
Core: Braided Dyneema SK78 core, LIROS-Heat-Stretch-System, LIROS Coating System with a very thin extra traction layer

Diameters and Colours:
8mm, 10mm, 12mm 14mm - Steel blue with yellow, red and blue colour code options 

LIROS Regatta 2000:

• Very low stretch < 1.5% at working load
• High load capacity
• Excellent smooth handling
• Non kinking, balanced braiding
• Excellent holding power in cleats and clutches
• Good Grip around winches
• Solid shape retention around winches - firm, compact braid construction doesn't flatten
• Runs freely through blocks and sheaves
• Spliceable - advanced core dependent splice
• LIROS-Heat-Stretch-System
• LIROS Coating System

LIROS-Heat-Stretch-System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance

LIROS Coating System - polyurethane impregnation process improves resistance to abrasion and protects against UV damage by up to 50%.

N.B. The inner traction layer is not load bearing and a certain amount is removed as part of the core dependent splice.

The LIROS manufacturing process produces a balanced braid on braid construction with consistency second to none
LIROS Manufacturing: meticulous attention to exacting standards ~ decades of experience ~ modern factory with state of the art, computer programmed twisting and braiding machinery.

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area in square metres
WLS = LIROS stretch at working load
< = less than