Please call us on01297 20744
Telephone lines open Weekdays 9.00am to 5pm, Saturday 9am to 2pm
Sourced exclusively from the manufacturer:
MF Catenificio Frigerio in Italy
Enhanced Solid Zinc Hot Dip Galvanising
Proof Load Tested
ISO4565 12x36 Pitch
Test Certificate available
MF Catenificio chain is manufactured, hot dip galvanised and proof tested in their modern research, test and production facility located near Lecco, Lake Como, Italy.
View a sample test certificate in this product listing via downloads
The proof load testing process ensures that each individual weld has been completed successfully.
MF Calibrated Anchor Chain features enhanced Solid Zinc Galvanising treatment with greater micron depth and prolonged protection against corrosion.
MF have developed an enhanced Solid Zinc Galvanising treatment in conjunction with the standard hot dip galvanising process.
Solid Zinc Galvanising is an MF duplex treatment where both aspects of the process are complementary hot dip molten zinc galvanisation.
The improved coverage, micron depth and adhesion properties extended the effective working life of the galvanising by up to 25%.
Solid Zinc galvanising has a bright smooth appearance.
Check your calibration:
12mm Calibrated Anchor Chain is available in one main calibration - ISO4565 (12 X 36)
It is very important to check the size and calibration of your gypsy/chain before you order
If you are unsure we can help you to decide - we will take all reasonable steps to ensure you get the correct chain
The simplest way to check that you are buying the correct calibration is to take a measurement from your existing chain, providing of course that it fits correctly.
We measure 10 links because, in practice, it is difficult to measure one link accurately enough.
The links should be laid out flat and pulled tight.
Measure from the outside edge to outside edge.
DETERMINING THE CORRECT CALIBRATION
N.B. The measurement for an old chain may be a little longer than new due to a degree of wear and elongation in use
12mm ISO4565 Grade 40 Anchor Chain is generally suitable for yachts over 14 metres and up to approximately 20 metres, length overall
Displacement : Length ratio
Your cruising intentions
The anticipated anchorage conditions e.g. depth, seabed holding characteristics, the length of fetch and degree of exposure to prevailing winds
The length of chain that will be deployed and any extra scope provided by an anchor warp
The weight and design of anchor
Your anchor rode is only as strong as the weakest link so ensure that all your connectors and shackles are rated to the requisite break load
12mm MF Grade 40 ISO4565 Dimensions:
|Chain Size||Outside Width||Pitch|
|12mm ISO4565||Maximum 43.2mm||36mm|
12mm MF Grade 40 ISO4565 Specification:
|Maximum Pin Dia.||Proof Load||Break Load||Weight per metre|
1Kn Force = 101.972Kg Break Load
90Kn = approximately 9177kg
Maximum Pin Diameter refers to the largest pin which will just fit into the end link of 12mm ISO chain
Select the largest possible galvanised shackle (or anchor connector) by pin diameter to fit the chain
Quality Control and Accountability
Every length of chain is checked and labelled with the manufacturer, the date received and a corresponding batch number when it arrives.
The batch number is then recorded at the point of sale.
Every chain order is therefore traceable and accountable to the Manufacturer Test Certificate.
A copy of the corresponding MF Catenificio Test Certificate is available with your order on request.
The Freight cost is calculated in the basket and assumes a UK Mainland delivery address until you are signed in with your registered delivery zip code.
You are welcome to collect from our Chandlery Store or from any event that we are attending in order to save this cost.