Petersen Stainless Insulators - Compression and Compression
PET-RICC06
Swageless compression fittings for an easy fit to backstay wires.
2 insulators are required to create an insulated backstay.
More Information
The only fail safe rigging insulator for wire available on the market today, the Hi-MOD backstay insulator has an internal ball-socket in the main body.
The nut is insulated from the stainless steel body by a Tufnol™ spacer, preventing electrical transference to the insulator body or opposite terminal. Should, for any reason, the Tufnol™ be compromised, the nut will bottom out against the stainless housing.
While the backstay will loosen, the insulating studs will remain attached to the insulator body, allowing the rig to be re-tensioned until a repair can be made.
| Wire Size (mm) | Pin Size (mm) | Hole Size (mm) | C-L (mm) | Puller Code |
|---|---|---|---|---|
| 6 | 11 | 11.1 | 110 | RIP7/16 |
| 7 | 12.7 | 12.7 | 131 | RIP1/2 |
| 8 | 14 | 14.28 | 153 | RIP5/8 |
| 10 | 16 | 16.2 | 159 | RIP5/8 |
| 12 | 19 | 19.05 | 192 | RIP3/4 |
| 14 | 22 | 22.2 | 222 | RIP7/8 |
| 16 | 25 | 25.4 | 258 | RIP |
