Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Petersen Stainless Steel Bar Toggles
Petersen Stainless Steel Bar Toggles
Petersen Stainless Steel Bar Toggles

Machined from the best quality European origin 316L bar

Mirror polish finish

Part number refers to origin and wire diameter

e.g. PET-TOG03 = Petersen and 3mm wire

DISCONTINUED PRODUCT-LIMITED STOCK AVAILABLE

£23.50

More Information
Accessories

Petersen bar toggles are machined from the best quality European origin 316L stainless steel plate with the same degree of care as their stainless steel lifting shackles, resulting in a reliable and consistent product.

All toggles have a mirror polish finish.

NOTE: Petersen use the following convention – the pin size is the smallest diameter hole that the pin will fit into, the hole size is the largest diameter pin that will fit in the hole.

For example if a pin is listed as being 12mm then the pin will fit into a 12mm diameter hole and conversely if a hole is listed as being 16mm then a 16mm diameter pin will fit in the hole.

If in doubt please ask.

Petersen Toggle Dimensions Diagram

Product No. P (mm) C (mm) T (mm) H (mm) OD (mm) L (mm) Weight (G)
TOG03 6.0 12.5 6.2 6.35 14.3 42 22
TOG04 8.0 17 7.9 8.00 18.0 53 44
TOG05 9.5 19 9.9 9.53 22.2 64 84
TOG06 11.0 22 10.9 11.11 25.4 72 100
TOG07 12.0 25 12.7 12.70 28.6 87 180
TOG08 14.0 28 13.8 14.28 34.9 95 292
TOG10 16.0 32 15.8 16.00 38.1 106 424
TOG12 19.0 38 17.8 19.05 47.6 125 724
TOG14 22.0 45 22.0 22.22 54.0 146 825
TOG16 25 50 25.0 25.40 63.5 162 1790
TOG19 28.0 58 28.2 28.58 69.9 184 2415
TOG22 32.0 64 31.8 32.00 76.2 207 3229
TOG26 35.0 70 34.8 35.00 82.5 227 5624


NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

Petersen Clevis Pin
Petersen Split Pins
Petersen Split Rings