Petersen Swage Fittings

Petersen Swage Fittings

Petersen Stainless Swaged Terminals are all made from European Grade 316L stainless steel

Jimmy Green Marine supply Petersen terminals:

  • For wire diameters from 3mm to 16mm as standard, larger sizes are available on...

Petersen Stainless Swaged Terminals are all made from European Grade 316L stainless steel

Jimmy Green Marine supply Petersen terminals:

  • For wire diameters from 3mm to 16mm as standard, larger sizes are available on request.
  • For thread sizes ranging from 1⁄4” to 1” UNF 
  • For Metric thread sizes ranging from 3mm to 26mm

All Petersen Stainless fittings are machined from solid bar or are electrically upset forged - no welding or welded joints

The electrical upsetting process gives beneficial grain structure to eyes, stemballs and T-terminals, minimising internal stress levels to improve fatigue performance.

All swaged fittings are supplied with a high quality polished finish.

Petersen Stainless fittings are manufactured in their UK facility - therefore, we can supply custom, non-standard fittings quickly and cost-effectively - please contact the Jimmy Green Sales Team with your requirements.

Inspection certificates to BS EN 10204 3.1B and certificates of conformity are available on request.

Petersen are a well respected manufacturer of A4 stainless swage terminals of long duration and operate a leading quality system with full material traceability.

Petersen swage terminals can be used with 1x19, 7x19 and all Compacted Strand construction wire ropes

NOTE:

Petersen use the following convention throughout the range – the pin size is the smallest diameter hole that the pin will fit into, the hole size is the largest diameter pin that will fit in the hole.

For example:-

  • a pin listed as 12mm will fit into a 12mm diameter hole 
  • a hole listed as 16mm will accept a 16mm diameter pin

If in doubt please check with the Jimmy Green Rigging Sales Team.