Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Petersen Swage Strap Toggle
Petersen Swage Strap Toggle
Petersen Swage Strap Toggle
Petersen Swage Strap Toggle

Petersen swage strap toggles are free from welds or casting.

Please view the table below for pin and wire dimensions.

£18.00

More Information
Accessories

Petersen 316 Swage Toggles are exclusively manufactured at the Petersen factory in England.

Forged from low carbon stainless steel 316L (1.4404) every Petersen Marine Swage Toggle is incredibly strong.

Petersen has been a manufacturer of stainlesss steel strap toggles for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage toggles can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects.

Petersen Swage Strap Toggle Diagram

Product Wire P (mm) D (mm) C (mm) T (mm) B (mm) L (mm) Nominal Weight (G)
MST03 3 6.0 6.3 14 8 39 84 25
MST04 4 8.0 7.5 18 9 45 103 45
MST05 5 9.5 9.1 21 11 52 111 89
MST06 6 11.0 12.5 25 13 64 146 230
MST07 7 12.7 14.3 27 15 70 168 271
MST08DS 8 12.7 16.0 27 15 80 169 295
MST10 10 16.0 18.0 36 19 100 212 569
MST12 12 19.0 21.4 45 22 132 278 1409
MST14 14 22.0 25.0 53 25 156 328 1912

NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

Petersen Clevis Pin
Petersen Split Pins
Petersen Split Rings