Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu

Anchoring Shackles

Team Jimmy Green has put together a range of load-rated shackles suitable for connecting your anchor to your anchor chain.

How to select your anchor to chain shackles:

  1. Select comparable break loads for each component of your anchor rode or anchoring system 
  2. Select hot-dipped galvanised or marine-grade stainless steel shackles for anchoring applications.
  3. Galvanised are less expensive and avoid any issue with dissimilar metals when connecting galvanised chains and anchors
  4. Select rated shackles for anchoring – check the load rating for compatibility with the chain and rope
  5. Avoid commercial pattern non-rated shackles for anchoring – if there is no provenance regarding their origin, there is no way of telling how weak they may be.
  6. Jimmy Green Galvanised Pin Shackles - genuine original green pin shackles, but with the pins hot-dip galvanised by Jimmy Green

Stainless Steel in contact with Galvanised Steel

Jimmy Green Marine stock anchoring shackles with a guaranteed manufacturer break load – test certificates are available for added reassurance – file them in the ship’s papers for future reference.

Shackles can be used to join an anchor warp to an anchor chain and to connect the end link of an anchor chain to the anchor.

Parts of a Shackle

Anchor Connections

Anchoring shackles can be used to attach the anchor to the end of the chain – two shackles back to back is the tried and trusted method.

Back to Back refers to the crown of each shackle bearing against one another, resulting in both the pins taking the load correctly, one in the hole/slot on the anchor shank, the other in the end link of the chain. A one-shackle solution may appear a simpler and cheaper method, but it could lead to disastrous results: The connecting hole or slot in the anchor shank is quite commonly a straight cut through the metal resulting in a hard right-angle edge. Passing the lug of a shackle through the slot and turning it to create a one-shackle connection with the pin through the end link of the chain may be possible. However, this will mean that the inside of the curved crown on the shackle will bear against the hard right-angle edges of the shank. This will adversely affect the strength of the connection and cause damage to the galvanising. Some anchors may have a bevelled, chamfered or filleted (rounded) edge around the shank slot/hole. However, the crown of a shackle will still only bear on the two machined edges, which will not optimise the spreading of the load. It is good practice to orientate all your connections, particularly metal to metal so that the two bearing edges are arranged to take the load in the best load-bearing manner.

Back-to-back shackles deliver excellent articulation, which can be extremely beneficial for lateral anchoring loads. Two shackles back to back

Some anchor connectors require the addition of an anchor shackle to facilitate articulation - the photos below show examples of both good and not-so-good practices.

N.B. It is advisable to fit a suitable bow shackle between the anchor shank and the connector to reduce lateral load risk. Unless an anchor connector is specifically designed to withstand lateral loads, it must be able to articulate to align with the direction of the pull. One solution is to fit a shackle/ Maillon Rapide/ fixed connector to the anchor shank and attach this to 3 links of anchor chain, which is joined to the anchor connector on the larger pin end. You will generally need the links to be one size larger than your anchor chain.

Anchor Connection

The curved crown of the shackle will bear the load unevenly in this relatively harsh anchor slot.

Anchor Connection

The curved crown of the shackle will take the load better on a rounded anchor slot. However, this anchor shank is relatively thin compared with the shackle, which may cause load problems.

Anchor Connection

This anchor has a harsh, right-angle edge to the slot, but the shackle is correctly aligned so that the load is spread along the length of the pin. The next connection should provide articulation.

Anchor Connection

This anchor connection is quite long, but it is designed to swivel and twist so that the anchor comes up over the stem head in the right orientation. The shackle is aligned, so the pin takes the load on the relatively harsh anchor slot. The shackle has a socket pin head to prevent snagging as it passes over the bow roller. The banana-shaped connector is from Osculati and provides the twist facility. There is also a swivel connection between the chain and the Twist Connector, presumably fitted to help in this respect.

Anchor Connection

Modern anchors are not normally supplied with this feature. The tried and trusted CQR has a large shackle with a welded pin to facilitate a variety of options for connecting to the anchor chain. In this example, rotation is provided by the anchor connector and articulation by the extra shackle. The load-bearing point between the two shackles will slip from side to side on the straight pin, but not a great deal because of the oversize nature of the CQR fitted shackle. The orientation of the second shackle optimises the load bearing between its curved crown and the pin on the anchor connector.

Read More
Filter By
More Filters +

Chain Size

Less Filters -

Anchor Right Flip Links - 8mm, 10mm and 12mm