Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Danbuoy Refurbishment Kit Inshore
Danbuoy Refurbishment Kit Inshore

Replacement Parts:

Float end caps and fixings

Float tubes with internal foam

£20.00

More Information

Danbuoy Float Refurbishment Kits

These are the parts required to replace UV or impact damaged floats on your existing Jimmy Green Danbuoy.

The contents of the kits vary depending on the danbuoy model:

End Cap Refurbishment:

  • 1 piece and 2 piece Inshore: 2 spare yellow polyethylene end caps (110mm diameter), 2 split pins.
  • Coastal, 2 piece telescopic: 2 spare yellow polyethylene end caps (110mm diameter), 1 small black rod clamp.
  • Offshore, 3 piece telescopic: 2 spare yellow polyethylene end caps (110mm diameter), 2 large black rod clamps, 4 black plastic push fit rivets.
  • Ocean, 3 piece telescopic: 2 spare yellow polyethylene end caps (110mm diameter), 2 large white rod clamps, 4 black plastic push fit rivets.

Replacement Floats:

  • Inshore - 110mm x 200mm float tube and internal foam
  • Coastal - 110mm x 200mm float tube and internal foam
  • Offshore - 110mm x 400mm float tube and internal foam

Even if you have an old danbuoy you should be able to refix the old float using the updated kit.
Conversely you may not need to use all the bits in the packet.
If you are still uncertain about your ability to carry out the upgrade then send the danbuoy back to us and we will refurbish it for you.