100 metre Reel - Petersen Compacted Strand Wire

Petersen Compacted Strand stainless steel wire is designed for high performance shrouds, backstays and forestays on sailboats and yachts committed to racing or extended/performance cruising.

The dyformed compact strand structure delivers lower stretch and higher break loads per given diameter than standard 1x19 wire.

The increase in performance comfortably offsets the minimal weight increase.

2.5mm, 3mm and 4mm diameters are available in 1x7 construction ~ 5mm up to and including 12mm diameter is manufactured in 1x19 construction ~ 14mm diameter and larger is manufactured in 1x36

This is the Jimmy Green minimum rate per metre for 100 metre reels of Petersen Compact Strand 316 stainless steel wire rope to grade 1.4401

The wire supplied may be measured from a larger traceable reel and wound on to a reel by hand and secured with insulation tape.
Please beware - the wire will instantly seek to spring out straight as soon as it is released.

Petersen Compact Strand is Manufactured in Europe from high quality European AISI 316 stainless steel grade 1.4401 conforming to EN12385 and EN10264

Polished in the fully austentic condition to give maximum corrosion resistance

Jimmy Green Marine operate a strict accountability process for every reel of wire that the Jimmy Green Rigging Team use and record the corresponding batch number on every rigging order.

Traceability is an important feature of the Jimmy Green assurance policy: STAINLESS STEEL WIRE - QUALITY CONTROL AND CARE

Jimmy Green Marine offer the full range of Sta-Lok and Petersen swageless terminals e.g. eye, forks, tees, strap toggles plus all manner of turnbuckle and backstay insulator options. 

Wire Minimum Break Load

MBL = Petersen manufacturer rated minimum break load