LIROS 14mm Regatta 2000 - Sheets, Halyards, Control Lines


Designed for the high loads on racing halyards and control lines.

The proven, uncompromising choice for demanding Regatta Sailing

Allow 10-14 days for delivery

£ 0.00 inc VAT

Total Weight: kg

Total Length: m

Liros Regatta 2000 (article 02000)

Regatta Racing Performance - hard wearing, very low stretch, high load capacity line engineered for best performance.

Cover:1:1 plaited special steel blue high twist polyester with 30% more wear resistance.
Core: Braided Dyneema SK78 core, LIROS-Heat-Stretch-System, LIROS Coating System with a very thin extra traction layer

Diameters and Colours:
8mm, 10mm, 12mm - Steel blue with yellow, red and blue colour code options 
14mm - avaiable to order from the LIROS factory

LIROS Regatta 2000:

  • Very low stretch < 1.5% at working load
  • High load capacity
  • Excellent smooth handling
  • Non kinking, balanced braiding
  • Excellent holding power in cleats and clutches
  • Good Grip around winches
  • Solid shape retention around winches - firm, compact braid construction doesn't flatten
  • Runs freely through blocks and sheaves
  • Spliceable - advanced core dependent splice
  • LIROS-Heat-Stretch-System
  • LIROS Coating System

LIROS Heat Stretch System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance

LIROS Coating System - polyurethane impregnation process improves resistance to abrasion and protects against UV damage by up to 50%.

N.B. The inner traction layer is not load bearing and a certain amount is removed as part of the core dependent splice

The LIROS manufacturing process produces a balanced braid on braid construction with consistency second to none
LIROS Manufacturing: meticulous attention to exacting standards ~ decades of experience ~ modern factory with state of the art, computer programmed twisting and braiding machinery

The Polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.
Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end

Diameter LBLMax SAWLS
8mm3800kg30sqm< 1.5%
10mm5000kg50sqm< 1.5%
12mm7200kg70sqm< 1.5%
14mm9500kg90sqm< 1.5%
16mm12600kg100sqm< 1.5%

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area in square metres
WLS = LIROS stretch at working load
< = less than<?p>

After saving your customised product, remember to add it to your basket.



* required fields