LIROS 16mm 3 Strand Polyester Spliced to 8mm Chain

LIROS 3 strand Polyester Spliced to 8mm DIN766 Grade 40 Calibrated Anchor Chain, prepared in-house by the Jimmy Green Rigging Team.

Consult the information and size chart in our ANCHORING SYSTEM ASSESSMENT to establish the most suitable specification and length for your motor or sailing yacht, considering the application - Bower, Second or Kedge anchor - your intended cruising plans - and your reliance on anchoring.

The Bitter End
Consider how you will attach the warp on deck or in your chain locker.
This will depend on whether the strongpoint, e.g. cleat, U bolt, or eye plate, will be used to take the full strain of the rode or only to prevent accidental loss overboard:

• Finishing the rope yourself - no selection required - the rope will just be cut with a heat gun
• Attaching to a mooring cleat - choose a Loop Splice
• Attaching to a U Bolt or Eye Plate
  • with a knot - choose a whipping or heat-sealing option
  • with a shackle - choose an eye splice with or without a thimble N.B. Galvanised thimbles tend to be very large and cumbersome

Jimmy Green 3 strand Rope to Chain Splicing Advisory:

• 3 Strand Nylon is attached to chain using a one-link splice - a crown splice formed around the last link of the chain.
• The one link splice is very strong, but the critical strands around the end link should be scrutinised regularly for signs of chafe.
• Most windlass manufacturers recommend three strand warps for use on rope/chain gypsies.
• This is a required field in the custom build process

LIROS 3 Strand Polyester Article 00111/001110 Facts, Features and Plus Factors:

• 100% Polyester manufactured to DIN EN ISO 1140 Standard
• Heat set twisted lay construction offers the same strength and stretch properties as the eight strand, Octoplait version
• Less expensive than Octoplait but requires traditionally laid rope handling and stowage
• Trrutworthy load capacity
• Dependable endurance throughout working life
• Superb UV stability
• Excellent Durability, wear and abrasion resistance
• Overall, a good anchor warp that will run smoothly over a rope/chain gypsy
• Reliable shock absorbing elongation under load > 15% working load stretch
• Available in White, Black and Navy
• Overall, LIROS polyester is the most flexible, pliable three strand option for warps

LIROS Break Load: 10mm 2000kg ~ 12mm 2600kg ~ 14mm 3600kg ~ 16mm ~ 5000kg ~ 18mm 6000kg ~ 20mm 7000kg ~ 24mm 10500kg ~ 30mm 14800kg

Jimmy Green MF Grade 40 Hot Dip Galvanised Calibrated Anchor Chain is sourced exclusively from MF Catenificio Frigerio, Italy

MF Catenificio chain is manufactured, hot dip galvanised, and proof tested in their modern research, test and production facility located near Lecco, Lake Como, Italy.

The proof load testing process ensures that each weld has been completed successfully.

MF Calibrated Anchor Chain features enhanced Solid Zinc Galvanising treatment with greater micron depth and prolonged protection against corrosion.

MBL = Manufacturer Break Load
Weight = weight in kg per metre

For more information on MF Chain: MF GRADE 40 SOLID ZINC HOT DIP GALVANISED CALIBRATED ANCHOR CHAIN

Grade 40 Hot Dip Galvanised Calibrated Anchor Chain from Lofrans, renowned worldwide for their range of quality windlasses.

Lofrans calibrated anchor chain is stamped LFR at regular intervals as a testimony to their belief in the quality of their chain.

Weight

MBL = Manufacturer Break Load
Weight = weight in kg per metre

For more information on Lofrans calibrated anchor chain: LOFRANS GRADE 40 DIN766 CALIBRATED HOT DIP GALVANISED ANCHOR CHAIN

Titan Grade 43 Calibrated Anchor Chain is manufactured, hot dip galvanised, hall-marked, proof-tested, and engineered by CMP to specifications exceeding DIN766.

Titan Marine Products is a brand of Canada Metal (Pacific), the manufacturer of the world-renowned Rocna and Vulcan range of anchors. CMP specialise in the manufacture of World Class Marine Anchor Chain

MBL = Manufacturer Break Load
Weight = weight in kg per metre

For more information on Titan calibrated anchor chain: TITAN GRADE 43 HOT DIP GALVANISED CALIBRATED ANCHOR CHAIN

William Hackett stainless steel calibrated anchor chain, manufactured on automatic chain-making machines from A316L to Grade 3

Service Load Safety Factor = 4:1
M.B.L. = Manufacturer Minimum Break Load

This chain is sourced in the UK from William Hackett Ltd, a respected manufacturer and distributor of chain since 1892