Gleistein 32mm Geo-Square Polyester Mooring Strops

Consult the Jimmy Green Mooring Strop Size Guide following the instructions below

1. Find the column in the table that best represents your Boat Length Overall
2. Compare your displacement with the tonnage listed.
3. If it is greater than displayed in your column in the table, consider moving across to the next column to increase the diameter.
4. Take advice on local conditions and check the benchmark size from the table against other similar sized boats moored in your area.
5. Have a good look at the mooring configurations on neighbouring yachts with a critical eye and judge whether your set up should be the same
6. Consider whether you can make any improvements in terms of mooring convenience and anti chafe measures

Anchorplait (Octoplait) is the optimum solution for single moorings:

• The rope construction precludes the possibility of cockling (unravelling)
• The splice design is very secure and will not unravel

Gleistein Geo-Square - Square plaited (octoplait) Polyester is ideal for single line warps/strops, particularly on a swinging mooring

Construction
Square-plaited HT continuous filament white polyester fibre
The same balanced construction as Anchorplait
8 strand design, 2 pairs right hand, 2 pairs left hand lay gives a balanced performance and no twist under tension.
Thermally stabilised and heat set during the manufacturing process to enhance endurance and handling

Geo-Square Plus Factors

• Excellent abrasion resistance
• UV stabilised for outstanding endurance in the sun
• Square construction cannot kink, prevents cockling
• Flakes like chain
• Spliceable to chain
• Extremely strong - Spliced Manufacturer Break Load = 18,000kg
• Retains flexibility throughout working life.
• < 15% working load stretch provides excellent shock absorption
• Eminently suitable as mooring line

Gleistein Break Load in accordance with DIN EN ISO 2307: 32mm = 20,000kg