Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Petersen Forged Stainless Steel Swage Eye
Petersen Forged Stainless Steel Swage Eye
Petersen Forged Stainless Steel Swage Eye
Petersen Forged Stainless Steel Swage Eye

Petersen Forged eyes are manufactured using the electrically upset process.

This process aligns the material grain for increased strength.

£9.00

More Information

Petersen 316 swaged eyes are exclusively manufactured at the Petersen factory in England.

Forged from low carbon stainless steel 316L (1.4404) every Petersen Forged Swage Eye is incredibly strong and light.

Petersen has been a manufacturer of stainless steel swage eyes for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage eyes can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects

Product Wire (mm) H (mm) B (mm) D (mm) C (mm) T (mm) OD (mm) (mm) L (60mm) Nominal Weight (g)
FSE03 3 6.35 39 6.3 11.0 5 14.3 60 12
FSE04 4 8.0 45 7.5 14.0 6.5 18 72 24
FSE05 5 9.53 52 9.1 17.0 7.8 21 84 36
FSE06 6 11.1 64 12.5 20.0 9.5 25 102 82
FSE07 7 12.7 70 14.3 23.0 11.5 28 113 120
FSE08DS 8 12.7 80 16.0 23.0 11.5 28 125 120
FSE08 8 14.28 80 16.0 24.0 13.5 32 128 170
FSE08US 8 16.0 80 16.0 29.0 15 34 136 195
FSE10 10 16.0 80 16.0 29.0 15 34 155 234
FSE12 12 19.05 132 21.4 34.0 17.5 42 197 442
FSE14 14 22.2 156 25.0 40.0 21.5 48 232 708
FSE16 16 25.4 176 28.2 46.0 23.5 58 262 1005



NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.