Petersen Forged Swage Eye

Petersen Forged eyes are manufactured using the electrically upset process.

This process aligns the material grain for increased strength.

£ 5.40 inc VAT

£ 6.00

-10%

Calculate Delivery Cost

Petersen 316 swaged eyes are exclusively manufactured at the Petersen factory in England.

Forged from low carbon stainless steel 316L (1.4404) every Petersen Forged Swage Eye is incredibly strong and light.

Petersen has been a manufacturer of stainless steel swage eyes for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage eyes can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects

ProductWire (mm)H (mm)B (mm)D (mm)C (mm)T (mm)OD (mm) (mm)L (60mm)Nominal Weight (g)
FSE0336.35396.311.0514.36012
FSE0448.0457.514.06.5187224
FSE0559.53529.117.07.8218436
FSE06611.16412.520.09.52510282
FSE07712.77014.323.011.528113120
FSE08DS814.288016.023.011.528125120
FSE08814.288016.024.013.532128170
FSE08US816.08016.029.01534136195
FSE101016.08016.029.01534155234
FSE121219.0513221.434.017.542197442
FSE141422.215625.040.021.548232708
FSE161625.417628.246.023.5582621005


NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

You may also like