Petersen Machined Swage Eye

Petersen machined swage eyes are available in a range of sizes.

Please check the hole size in the table below.

£ 8.01 inc VAT

£ 8.90

-10%

Calculate Delivery Cost

Petersen 316 Swage Eyes are exclusively manufactured at the Petersen factory in England.

Petersen has been a manufacturer of stainless steel swage eyes for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage eyes can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects

ProductWire (mm)H (mm)B (mm)D (mm)C (mm)T (mm)L (mm)Nominal Weight (G)
MSE0446.35457.5146.57223
MSE0558.0529.1177.88542
MSE0669.536412.5209.5103100
MSE06US611.16412.52311.5110109
MSE07712.77014.32311.5114129
MSE08DS812.78016.02311.5123152
MSE08814.288016.02413.5130178
MSE08US816.08016.02915134202
MSE101016.010018.02915155245
MSE121219.0513221.43417.5197462
MSE141422.215625.04021.5235721
MSE161625.417628.24623.52641090
MSE16US16.828.617628.251272741430
MSE191928.621034.55127.53081780
MSE222232.024240.358313562704
MSE262635.029045.96333.54143855


NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.