Petersen Swage Strap Toggle

Petersen swage strap toggles are free from welds or casting.

Please view the table below for pin and wire dimensions.

£ 11.90 inc VAT

Calculate Delivery Cost

Petersen 316 Swage Toggles are exclusively manufactured at the Petersen factory in England.

Forged from low carbon stainless steel 316L (1.4404) every Petersen Marine Swage Toggle is incredibly strong.

Petersen has been a manufacturer of stainlesss steel strap toggles for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage toggles can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects

ProductWireP (mm)D (mm)G (mm)T (mm)B (mm)L (mm)Nominal Weight (G)
MST0336.06.3148398425
MST0448.07.51894510345
MST0559.59.121115211189
MST06611.012.5251364146230
MST07712.714.3271570168271
MST08DS812.716.0271580169295
MST101016.018.03619100212569
MST121219.021.445221322781409
MST141422.025.053251563281912


NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

You may also like