Petersen Stainless Steel Eye Jaw Toggle
PET-EJT1/2
Toggle bent from the best quality 316L stainless plate
Pin machined from the best quality 316L S/S bar
European origin stainless steel
Order by pin diameter
More Information
Accessories
Petersen eye jaw toggles are shaped and machined from the best quality European origin 316L stainless steel plate and bar with the same degree of care as Petersen stainless steel lifting shackles, resulting in a reliable and consistent product.
All toggles have a mirror polish finish.
>NOTE: Petersen use the following convention – the pin size is the smallest diameter hole that the pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example if a pin is listed as being 12mm then the pin will fit into a 12mm diameter hole and conversely if a hole is listed as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.
| Product No. | P (mm) | T (mm) | Y (mm) | L (mm) | OL (mm) | W (mm) | Weight (G) |
|---|---|---|---|---|---|---|---|
| EJT1/2 | 12.7 | 13 | 26 | 51 | 81 | 12.5 | 81 |
| EJT5/8 | 16 | 17 | 32 | 64 | 101 | 16 | 223 |
| EJT3/4 | 19 | 20 | 39 | 74 | 117 | 19 | 413 |
| EJT7/8 | 22 | 24 | 47 | 84 | 137 | 22 | 708 |
| EJT1 | 25 | 27 | 51 | 100 | 158 | 25 | 891 |
| EJT11/8 | 28 | 29 | 59 | 108 | 173 | 28 | 1481 |
| EJT11/4 | 32 | 34 | 66 | 123 | 197 | 32 | 1937 |
| EJT13/8 | 35 | 37 | 70 | 150 | 234 | 35 | 3164 |
NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.
