
Crosby G335 Galvanised Replacement Link
CRB-1013156
Also known as a C Link
For joining two lengths of chain
N.B. US imperial sizing
Manufactured by the Crosby Group in the USA
Galvanised finish on forged and tempered steel
More Information
Features
Please note that Jimmy Green Marine does not recommend joining chain where the connection is load critical or a matter of safety.
Crosby C Links are available in 5/16" and 3/8" - Please note that these are American imperial sizes.
Crosby G335 link - One joining link may (this is not guaranteed) run successfully through an anchoring gypsy.
The 3/8 link fits onto the end link of a 10mm DIN766 and a 10mm ISO4565 calibrated chain.
The 5/16 link may need some fiddling to get it to fit onto the end link of some 8mm calibrated galvanised chain.
The 5/16 Crosby link may not suit some makes of 8mm DIN766 calibrated anchor chain because it is physically slightly bigger than an 8mm DIN766 calibrated link - This may cause articulation issues.
Chain links can be used to join lengths of chain but cannot be considered as reliable as a new length of chain.
It is extremely important to check regularly for signs of damage, rust and wear.
Crosby G335 Manufacturer Break Loads:
5/16 (for 8mm chain) = 3536kg
3/8 (for 10mm chain) = 4988kg
Integral rivets combine the two halves.
Rivets must be peened once connected.
The 3/8 size has additional interlocking lugs, whereas the 5/16 does not have additional lugs.
Size | 5/16 | 3/8 |
---|---|---|
A | 8.6mm | 10.4mm |
B | 23.9mm | 28.7mm |
C | 12mm | 14.2mm |
D | 12mm | 14.2mm |
E | 43mm | 52.3mm |
F | 29.5mm | 35mm |
G | 9.6mm | 12mm |
Please note that Jimmy Green Marine does not recommend joining chain where the connection is load critical or a matter of safety.
- Chain Size - 8mm
- Chain Size - 10mm