Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Sta-Lok Wedge for Dyform & Compact
Sta-Lok Wedge for Dyform & Compact
Sta-Lok Wedge for Dyform & Compact

Replacement Cones

Also known as wedges

For Sta-Lok swageless terminals

For Compact Strand wire

For some sizes of Dyform as well see chart below

Laser marked for identification

Sold Individually

£6.50

More Information

Sta-Lok Compact Strand Self-fit Wedges, for use with Sta-Lok DIY swageless terminals and Compact Strand wire, can be fitted in situ, onsite or onboard with simple hand tools.

Absolutely essential whenever Sta-Lok terminals are being re-used.

These cones are specifically designed for use with Compacted Strand wire, but only certain diameters of Dyform wire.

Do not use on standard 1x19, 7x7, 7x19

Dyform branded wire is a legacy brand that is no longer available. Modern wire of similar construction is called Compact strand.

4mm, 5mm, 8mm and 10mm wedges are suitable for both Dyform and Compact Strand. If you are ordering for 6mm and 7mm wire please check the chart below to see which parts you require.

Compacted strand and Dyform wire ropes provide higher breaking loads and lower stretch than conventional 1 x 19 wire

There are 5 different constructions (1×7), (1×19), (1×25), (1×31) and (1×36)

Sta-Lok Swageless Self-Fit terminals will terminate each of these constructions using different wedges - see table below.

Sta-Lok Wire Diameter Construction Compact Dyform
154-04 4mm 1x7 Yes Yes
154-05 5mm 1x19 Yes Yes
154-06 6mm 1x19 No Yes
154-06C 6mm 1x19 Yes No
154-07 7mm 1x19 No Yes
154-07C 7mm 1x19 Yes No
154-08 8mm 1x19 Yes Yes
154-10 10mm 1x19 Yes Yes
154-12 12mm 1x19 No Yes
154-12C19 12mm 1x19 Yes No

Dyform Wedges