Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Sta-Lok Wedge for Dyform & Compact

Sta-Lok Wedge for Dyform & Compact
Sta-Lok Wedge for Dyform & Compact

Self-Fit Replacement Cones

Also known as wedges

For Sta-Lok swageless terminals

For Compact Strand wire

For some sizes of Dyform as well see chart below

Laser marked for identification

Sold Individually


More Information

Sta-Lok Self-Fit Terminals

Sta-Lok Compact Strand Self-fit Wedges, for use with Sta-Lok DIY swageless terminals and Compact Strand wire, can be fitted in situ, onsite or onboard with simple hand tools.

The concept was originally brought to the marine market over 48 years ago.

Sta-Lok Self Fiot Terminals are recognised worldwide for consistent high quality and fail-safe reliability.

The Sta-Lok self-fit terminal will work under constant loading and variable shock loading.

Fitted correctly, the termination is stronger than the rated breaking load of the wire rope.

  • In situ assembly - simple to install using only hand tools
  • No pre-measurement required
  • A different wedge is required for 1×19, 7 strands and compacted strand wire rope
  • All wedges are laser marked for easy identification and selection
  • Guaranteed stronger than wire rope
  • Sta-Lok wedges are absolutely essential whenever Sta-Lok terminals are being re-used.

These cones are specifically designed for use with Compacted Strand wire, but only certain diameters of Dyform wire.

Do not use on standard 1x19, 7x7, 7x19

Dyform branded wire is a legacy brand that is no longer available. Modern wire of similar construction is called Compact or Compacted Strand.

4mm, 5mm, 8mm and 10mm wedges are suitable for both Dyform and Compact Strand. If you are ordering for 6mm, 7mm and 12mm wire please check the chart below to see which parts you require.

Compacted Strand and Dyform wire ropes provide higher breaking loads and lower stretch than conventional 1 x 19 wire

There are 5 different constructions (1×7), (1×19), (1×25), (1×31) and (1×36)

Sta-Lok Swageless Self-Fit terminals will terminate each of these constructions using different wedges - see table below.

Sta-Lok Wire Diameter Construction Compact Dyform
154-04 4mm 1x7 Yes Yes
154-05 5mm 1x19 Yes Yes
154-06 6mm 1x19 No Yes
154-06C 6mm 1x19 Yes No
154-07 7mm 1x19 No Yes
154-07C 7mm 1x19 Yes No
154-08 8mm 1x19 Yes Yes
154-10 10mm 1x19 Yes Yes
154-12 12mm 1x19 No Yes
154-12C19 12mm 1x19 Yes No

Check out Sta-Lok's 5 Easy Steps to Instant Rigging:

Sta-Lok Fitting Instructions