Guardrail Netting

Guardrail Netting, manufactured from 50mm knot to knot nylon, select your guardrail height, 60cm or 75cm and the length you need to cover in metres - N.B. our netting is measured open not closed.

£ 2.10 VAT incl.

£ 3.00

-30%

Calculate Delivery Cost

Guardrail Netting, manufactured from 50mm knot to knot 3 strand nylon line, 10.5 meshes deep

Available by the metre, select your guardrail height, 60cm or 75cm high and the length you need to cover in metres

We will calculate the amount of 'closed' netting to measure from the reel to cover the length you require at your selected height

Ideal for helping to keep everything and everyone safely on board

Making a tidy job of fitting Guardrail Netting can be time consuming
Here are a few tips:

We recommend a border cord at the bottom e.g. between the stanchion bases so that the netting can be stretched out evenly

The aim is to avoid an untidy baggy finish

LIROS 8 plait white polyester is ideal for this task in e.g. 4mm or 5mm

The upper guardwire and bottom cord can be passed in and out through the top and bottom meshes of the netting

It is not advisable to leave the netting on the guardwire unprotected because it will be subject to undue wear and tear

We recommend seizing each mesh top and bottom to prevent wear on the top and to keep the netting from sliding out of shape

A Netting Needle or home made bobbin is a handy tool to put a couple of hitches on each mesh and be able to carry the whole length of line onto the next mesh without a massive tangle

LIROS 8 plait white polyester is also ideal for this task in e.g. 2mm, 2.5mm or 3mm

You may also like