14mm DIN766 14x42 MF Grade 40 Calibrated Anchor Chain

14mm DIN766 14x41 MF Grade 40 Calibrated Anchor Chain

Sourced exclusively from the manufacturer:
MF Catenificio Frigerio in Italy

Enhanced Solid Zinc Hot Dip Galvanising

Proof Load Tested
Test Certificate available

100 or 120 metre length
Other lengths available on request

Allow time for delivery from the factory

£ 2,475.00 inc VAT

Calculate Delivery Cost

Jimmy Green 14mm MF Grade 40 Hot Dip Galvanised Calibrated Anchor Chain is sourced exclusively from MF Catenificio Frigerio

MF Catenificio chain is manufactured, hot dip galvanised and proof tested in their modern research, test and production facility located near Lecco, Lake Como, Italy.

View a sample test certificate in this product listing via downloads

The proof load testing process ensures that each individual weld has been completed successfully.

MF Calibrated Anchor Chain features enhanced Solid Zinc Galvanising treatment with greater micron depth and prolonged protection against corrosion.

MF Solid Zinc Galvanising

MF have developed an enhanced Solid Zinc Galvanising treatment in conjunction with the standard hot dip galvanising process.
Solid Zinc Galvanising is an MF duplex treatment where both aspects of the process are complementary hot dip molten zinc galvanisation.
The improved coverage, micron depth and adhesion properties extended the effective working life of the galvanising by up to 25%.
Solid Zinc galvanising has a bright smooth appearance.

Check your calibration:

14mm Calibrated Anchor Chain is available in one main calibration - DIN766 (14 X 41) 

It is very important to check the size and calibration of your gypsy/chain before you order

If you are unsure we can help you to decide - we will take all reasonable steps to ensure you get the correct chain

The simplest way to check that you are buying the correct calibration is to take a measurement from your existing chain, providing of course that it fits correctly.

We measure 10 links because, in practice, it is difficult to measure one link accurately enough.
The links should be laid out flat and pulled tight.
Measure from the outside edge to outside edge.

DETERMINING THE CORRECT CALIBRATION

N.B. The measurement for an old chain may be a little longer than new due to a degree of wear and elongation in use

14mm DIN766 Grade 40 Anchor Chain is generally suitable for yachts over 20 metres, length overall
Factor in:
Displacement : Length ratio
Your cruising intentions
The anticipated anchorage conditions e.g. depth, seabed holding characteristics, the length of fetch and degree of exposure to prevailing winds
The length of chain that will be deployed and any extra scope provided by an anchor warp
The weight and design of anchor

Your anchor rode is only as strong as the weakest link so ensure that all your connectors and shackles are rated to the requisite break load


MF 14mm DIN766 Dimensions

14mm DIN766 MF Grade 40 Dimensions:


Chain Size Outside Width Pitch 
14mm DIN766Maximum 50mm41mm


14mm DIN766 MF Grade 40 Specification:


Maximum Pin Dia.Proof LoadBreak Load  Weight per metre
16mm50Kn125Knc 4.4kg


1Kn Force = 101.972Kg Break Load

125Kn = approximately 12746kg

Maximum Pin Diameter refers to the largest pin which will just fit into the end link of 14mm DIN766 chain

Select the largest possible galvanised shackle (or anchor connector) by pin diameter to fit the chain



Quality Control and Accountability
Every length of chain is checked and labelled with the manufacturer, the date received and a corresponding batch number when it arrives.
The batch number is then recorded at the point of sale.
Every chain order is therefore traceable and accountable to the Manufacturer Test Certificate.
A copy of the corresponding MF Catenificio Test Certificate is available with your order on request.


MF chain manufacturing has Lloyds Register approval to the ultimate ISO 9001 quality standard:

MF LLOYDS REGISTER APPROVAL TO ISO 9001



Jimmy Green charge for shipping based on the total weight on a pallet and the delivery destination Zip Code.

The Freight cost is calculated in the basket and assumes a UK Mainland delivery address until you are signed in with your registered delivery zip code.

You are welcome to collect from our Chandlery Store or from any event that we are attending in order to save this cost.

MF 14mm

- Calibrated Anchor Chain Sample Test Certificate - MF Catenificio 14mm DIN766 Grade 40

Download (803.75k)