Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Petersen Swage Fork Terminal
Petersen Swage Fork Terminal
Petersen Swage Fork Terminal
Petersen Swage Fork Terminal

Machined from solid bar

No welds or casting

£15.00

More Information
Accessories

Petersen 316 Swage Forks are exclusively manufactured at the Petersen factory in England.

Machined from solid low carbon stainless steel 316L (1.4404) so every Petersen Marine Swage Fork is incredibly strong and free from welds.

Petersen has been a manufacturer of stainless steel swage forks for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage forks can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects.

Petersen swage fork dimensions

Product Wire (mm) P (mm) D (mm) C (mm) T (mm) B (mm) L (mm) Nominal Weight (G)
F03 3 6 6.3 12.5 6.2 39 70 20
SF04 4 8 7.5 17 7.9 45 83 36
SF05 5 9.5 9.1 19 9.9 52 97 64
SF06 6 11 12.5 22 10.9 64 113 142
SF07 7 12 14.3 25 12.7 70 128 172
SF08DS 8 12 16.0 25 12.7 80 140 196
SF08 8 14 16.0 28 13.8 80 144.5 278
SF10 10 16 18.0 32 15.8 100 174 376
SF12 12 19 21.4 38 17.8 132 227 1097
SF14 14 22 25.0 45 22 156 258 1105
SF16 16 25 28.2 50 25 176 295.5 1683
SF19 19 28 34.5 58 28.2 210 342 2580
SF22 22 32 40.3 64 31.8 242 391 3611
SF26 26 35 45.9 70 34.8 290 451.5 5019

NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

Petersen Clevis Pin
Petersen Split Pins
Petersen Split Rings