Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
Petersen Swage Shackle Toggle
Petersen Swage Shackle Toggle
Petersen Swage Shackle Toggle
Petersen Swage Shackle Toggle

Petersen Stainless Steel Shackle Toggles are forged from solid stainless steel bar, no welds or casting.

Forged eye fitted directly onto a D shackle with countersunk pin.

£29.00

More Information
Accessories

Petersen 316 Swage Shackle Toggles are exclusively manufactured at the Petersen factory in England.

Forged from low carbon stainless steel 316L (1.4404) every Petersen Marine Swage Shackle Toggle is incredibly strong.

Petersen has been a manufacturer of stainless steel swage shackle toggles for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage shackle toggles can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects.

Product Wire (mm) P (mm) D (mm) B (mm) SB (mm) SL (mm) S (mm) J (mm) L (mm) Nominal Weight (G)
SST03 3 6.0 6.3 39 5 14 3 14 82 25
SST04 4 8.0 7.5 45 6 16 4 20 101 48
SST05 5 9.5 9.1 52 8 22 4 22 118 89
SST06 6 11.0 12.7 64 9.5 27 5 25 141 179
SST07 7 12.7 14.3 70 11 32 5 27 158 273
SST08 8 14.0 16.0 80 12.7 36 5 27 158 273
SST10 10 16.0 18.0 100 14.3 42 6 29 179 407
SST12 12 19.0 21.4 132 16 45 6 32 263 1027
SST14 14 22.0 25.0 156 19 63 8 38 309 1508



NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

Petersen Clevis Pin
Petersen Split Pins
Petersen Split Rings