Petersen Swage Shackle Toggle

Petersen Stainless Steel Shackle Toggles are forged from solid stainless steel bar, no welds or casting.

Forged eye fitted directly onto a D shackle with countersunk pin.

£ 13.41 inc VAT

£ 14.90

-10%

Calculate Delivery Cost

Petersen 316 Swage Shackle Toggles are exclusively manufactured at the Petersen factory in England.

Forged from low carbon stainless steel 316L (1.4404) every Petersen Marine Swage Shackle Toggle is incredibly strong.

Petersen has been a manufacturer of stainless steel swage shackle toggles for many years and during that time has built an industry leading quality system with full material traceability.

Petersen swage shackle toggles can be used with many different wire-rope constructions and spiral strand, suitable for all rigging projects.

ProductWire (mm)P (mm)D (mm)B (mm)SB (mm)SL (mm)S (mm)J (mm)L (mm)Nominal Weight (G)
SST0336.06.3395143148225
SST0448.07.54561642010148
SST0559.59.15282242211889
SST06611.012.7649.527525141179
SST07712.714.3701132527158273
SST08814.016.08012.736527158273
SST101016.018.010014.342629179407
SST121219.021.413216456322631027
SST141422.025.015619638383091508


NOTE: Petersen Stainless use the following convention throughout their range – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

You may also like